if you use the software made by wouxun it is harder. The owx software is
easyer.
----- Original Message -----
From: "colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, July 04, 2011 2:51 AM
Subject: Re: wouxun ht
> John:
> I was programming channels into memory with tone, offset, frequency and
> all
> the rest of the crap you have to set for a channel now, in about 3 minutes
> after picking up my friends Wouxun KG-uvD1p.
> I just had someone tell me the button layout, and then I just used the
> voice
> prompts, and a little of the knowledge i've picked up from the list and
> reading about the radio.
> Super simple.
> Probably about the same as programming the TH F6A. And, in the case of
> the
> wouxun, the software would actually be more of a pain to program with than
> doing it manually.
> If you can program the TH F6A, or the ICT90 by hand, these wouxun HT's are
> probably a bit easier.
>
> 73
> Colin, V A6BS
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, July 03, 2011 6:40 PM
> Subject: Re: wouxun ht
>
>
>>I don't know,I know people who program commercial radios for a living who
>> say those are almost impossible to program manually without a lot of time
>> in
>> reading the manual. That's people who program commercial radios while the
>> software may make it seem easier, with commercial radios there is no
>> offset,
>> you put in the receive and transmit frequency for each channel, power
>> level
>> for each channel and often much more. I can say though these programs
>> that
>> default to the 2 meter offset no matter which band you're on, I'd rather
>> those make you enter the transmit frequency than change the offset for
>> every
>> band or memory channel that's not in 2 meters.
>> ----- Original Message -----
>> From: "chad morrison" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Sunday, July 03, 2011 8:31 PM
>> Subject: Re: wouxun ht
>>
>>
>>> ya, I don't know what they are talking about to be real about it. I
>>> programmed the first time that way. I just set up a band for UHF and
>>> the
>>> other band for VHF and set up the off sets respectively. not that big
>>> of
>>> deal. Not really any worse than programming anything else. Maybe in
>>> most
>>> radios you don't have to set the offset/power setting and they don't
>>> like
>>> the extra steps. I don't know it has been a long time sense I have
>>> programmed anything else. I just like this radio because when it is
>>> speeking english it takes alot of the guess work out of most of it. lol
>>> Chad
>>> KB9TZR
>>> ----- Original Message -----
>>> From: "KK4AHX Darren Duff" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Sunday, July 03, 2011 6:12 PM
>>> Subject: Re: wouxun ht
>>>
>>>
>>>> Yup. If you have a look at the eyes free manual you can learn how to
>>>> program
>>>> it by hand.... Some people say it's a pain but once you get use to it
>>>> it's
>>>> not that bad.
>>>>
>>>>
>>>>
>>>>
>>>> 73's.
>>>>
>>>> Darren Duff.
>>>>
>>>> amateur radio station KK4AHX.
>>>>
>>>>
>>>>
>>>> Cherokee Amateur Radio Society.
>>>>
>>>> http://www.cherokeehams.com
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: For blind ham radio operators
>>>> [mailto:[log in to unmask]]
>>>> On Behalf Of chad morrison
>>>> Sent: Sunday, July 03, 2011 6:19 PM
>>>> To: [log in to unmask]
>>>> Subject: Re: wouxun ht
>>>>
>>>> I'm starting to think that might be my problem.
>>>> ----- Original Message -----
>>>> From: "KK4AHX Darren Duff" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Sunday, July 03, 2011 2:53 PM
>>>> Subject: Re: wouxun ht
>>>>
>>>>
>>>>>I have the 2 D but mine doesn't do that. I didn't use the software to
>>>>> program it. I did it by hand.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 73's.
>>>>>
>>>>> Darren Duff.
>>>>>
>>>>> amateur radio station KK4AHX.
>>>>>
>>>>>
>>>>>
>>>>> Cherokee Amateur Radio Society.
>>>>>
>>>>> http://www.cherokeehams.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: For blind ham radio operators
>>>>> [mailto:[log in to unmask]]
>>>>> On Behalf Of chad morrison
>>>>> Sent: Sunday, July 03, 2011 8:47 AM
>>>>> To: [log in to unmask]
>>>>> Subject: wouxun ht
>>>>>
>>>>> Hello, I was wondering if anyone on this list owns the wouxun ht =
>>>>> kg-uv2d?
>>>>> If so are any of you having the problem of the radio resetting =
>>>>> itself
>>>>> to
>>>>> factory defaults? This is my second radio now I returned the = last
>>>>> radio
>>>>> for doing the same thing. I have only been using the wouxun =
>>>>> software
>>>>> to
>>>>> program the radio because I thought maby the owx programming =
>>>>> software
>>>>> might have done something to the radio. However, this radio = that
>>>>> I've
>>>>> only had for a cupple months is starting to act the same way = the old
>>>>> one
>>>>> did. Your input will be helpful to me and if anyone can = think of
>>>>> anything
>>>>> I might be doing wrong I am open to those Ideas as = well.=20 thanks,
>>>>> Chad
>>>>> KB9TZR
>>>>>
>>>>>
>>>>> _____________ NOD32 EMON 6260 (20110702) information _____________
>>>>>
>>>>> This message was checked by NOD32 antivirus system http://www.eset.com
>>>>>
>>>>>
>>>>>
>>>>> _____________ NOD32 EMON 6262 (20110703) information _____________
>>>>>
>>>>> This message was checked by NOD32 antivirus system http://www.eset.com
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _____________ NOD32 EMON 6262 (20110703) information _____________
>>>>>
>>>>> This message was checked by NOD32 antivirus system
>>>>> http://www.eset.com
>>>>>
>>>>>
>>>>
>>>>
>>>> _____________ NOD32 EMON 6262 (20110703) information _____________
>>>>
>>>> This message was checked by NOD32 antivirus system
>>>> http://www.eset.com
>>>>
>>>>
>>>>
>>>>
>>>> _____________ NOD32 EMON 6262 (20110703) information _____________
>>>>
>>>> This message was checked by NOD32 antivirus system
>>>> http://www.eset.com
>>>>
>>>>
|