Where can this MTTY program be downloaded from? Does it require further
hardwqare?
Laptop keyboard:
PC Cursor - JAWS plus Semicolon
JAWS Cursor - JAWS plus P
Route PC to JAWS - JAWS plus Appostophe
Route JAWS to PC - JAWS plus Left Bracket
For clicking, I just use the buttons found near the mouse touch pad.
The Other Howard, WA9RYF
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, February 13, 2011 8:48 PM
Subject: Re: Re_MTTY
> Mike,
>
> I know there is a different Jaws key on laptops, other than the insert
> key , but sorry i don't know what it is. On a desktop keyboard, the
> jaws key and the num pad plus and minus keys moves you between the
> different cursors, and the jaws key and the num pad "slash" key is
> left mouse, while the jaws key and the num pad "star" key are for right
> mouse button.
>
> If you are getting gibberish, you need to tune very slowly until you
> start to hear something that makes sense. If you are lucky, jaws will
> speak whole words, otherwise it will spell letter by letter. Gibberish
> can also come from too much drive to the sound card. You can control
> this by adjusting output from the rig to the sound card, or by
> adjusting the input knob on your Signal Link. Try turning this down
> all the way and then turn it up just enough till it starts speaking,
> then turn the vfo to try and tune it in.
>
> I have also heard it say "fig" anytime a number was printing, but
> somehow I got it to stop.
>
> You may also want to go under the file menu in MMTTY, under "options of
> receive log" and uncheck the item "show time stamp in rx window". You
> don't need that info showing in the rx window and getting spoken by jaws.
>
> Good luck, Steve KW3A
>
>
> On 2/13/2011 9:11 PM, Michael Ryan wrote:
>> Hi Steve:=20
>>
>> Well I downloaded and installed Jaws.=20
>> The only thing is, as its on a laptop, I don't know the key combination =
>> for the Jaws curser, PC curser and how to root them around. Also, I =
>> don't know how to left and right click.=20
>> I set it to say all and hear gibberish announced. Am I then supposed to
>> =
>> tune up and down until the gibberish becomes english?=20
>> When I sent CQ, Jaws reported a "fig" before and after the 1 in my call.
>> =
>> Not sure what that means.=20
>> I vary well might need my XYL to shift my filtering, if I'm going to do =
>> this from a remote stand point because, can't adjust the IF shift in =
>> HRD.=20
>> So, may have to work some RTTY for a day then when the XYL comes home =
>> from work, change it for when I want to work CW or SSB.=20
>>
>> TNX& 73:=20
>>
>> Michael De VO1RYN=20
>>
|