Slightly below dirt level--plenty of grass over top. A.S.

----- Original Message ----- 
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, July 31, 2010 3:19 PM
Subject: Re: pulling up the ground stake


> yep, sometimes that is the best way, especially if its a long ground 
> stake.
> as long as it's pounded down far enough to allow mower blades to miss it.
> 73
> Colin, V A6BKX
>
> ----- Original Message ----- 
> From: "Albert Sanchez" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, July 31, 2010 1:10 AM
> Subject: Re: pulling up the ground stake
>
>
>> Hi All
>> I resolved my ground stake question by pounding it further into the 
>> ground
>> so that it was hidden by the surrounding grass. The move is now complete
>> and
>> I am back online from the new QTH. I do not know when I will have
>> antenna(s)
>> up.
>> 73, Albert, W A 7 F X B
>> Greenville NC
>> EchoLink node: 75240
>> ----- Original Message ----- 
>> From: "Kevin Nathan" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, July 23, 2010 9:06 AM
>> Subject: Re: pulling up the ground stake
>>
>>
>>> Hi Al,
>>>
>>> I've done it before using a car jack setting on a piece of thicker wood
>>> and
>>> a chain
>>>
>>> Good luck with your move.  Very 73.
>>>
>>> Kevin :)
>>> Amateur Radio:  K7RX
>>>
>>>
>>> -----Original Message-----
>>> From: For blind ham radio operators
>>> [mailto:[log in to unmask]]
>>> On Behalf Of Albert Sanchez
>>> Sent: Friday, July 23, 2010 05:50
>>> To: [log in to unmask]
>>> Subject: pulling up the ground stake
>>>
>>> Hi All
>>> We are in the process of moving and one of the last things I need to do
>>> is
>>> remove the grounding stake that I pounded into the ground. Any ideas for
>>> an
>>> easy removal procedure? A.S.
>>> 73, Albert, W A 7 F X B
>>> Greenville NC
>>> EchoLink node: 75240
>