Ah, Steve, that's my problem.
I use the PF key and menu 48 now for tuning at 30 watts output when using my
Ameritron amp, so I guess I can't have it both ways.
I knew there was a reason why I couldn't do it with my current set-up, and
you just jogged my memory as to why.
Thanks, and 73 from Tom behler: KB8TYJ
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, April 03, 2011 8:13 AM
Subject: Re: Taking S meter readings with TS480
Tom,
Set menu 48 to 62 to let the pf key read s-meter. If you already have
the pf key set to read frequency, you will lose this, but you can always
get freq by hitting the "ent" key twice.
73, Steve KW3A
On 4/3/2011 8:04 AM, tom behler wrote:
> Hi, all.
>
> I know this is very basic, but can someone tell me how to take audible S
> meter readings with the TS480?
>
> I thought I heard somewhere that this can be done, but I can't find it in
> the manual anywhere.
>
> Personally, I don't put a lot of stock in S meter readings, but I guess it
> can be a handy tool to have access to at times.
>
> Thanks, and 73 from Tom Behler: KB8TYJ
>
|