Steve,

Never knew that.   I'll have to file this one away with my TS-2000 notes.

73, Steve KW3A
----- Original Message ----- 
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, May 11, 2010 11:33 AM
Subject: Re: TS-2000 and split.


> Steve,
>
> Quite by accident, I discovered that you won't be able to reset the radio 
> if
> you're in VFO B.  Fortunately, you can use this method to see where you 
> are
> because the radio asks for confirmation before doing the reset, so you can
> get out of it without losing settings.
>
> Steve
>
> ----- Original Message ----- 
> From: "Steve Forst" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, May 11, 2010 11:06
> Subject: Re: TS-2000 and split.
>
>
>> Rick,
>>
>> That is one of the quirks  of  the 2000, it doesn't tell you what vfo you
>> are on. But it really doesn't matter if you rx on vfo "A" and tx on vfo
>> "B"
>> or the other way around.   The radio doesn't care.   You can reverse what
>> is
>> the rx and the tx vfo by hitting the a/b button when in split mode.  But
>> again it doesn't matter which is rx and which is tx.
>>
>>
>> Something that may or may not help you is while in split mode, push and
>> hold
>> the TF button.  It is the one just to the right of the menu button and 
>> has
>> a
>> dimple in the middle.   If you press and hold while in split mode it will
>> jump to the TX freq and the voice will announce it.  release it and you 
>> go
>> back to the RX vfo.  If not in split mode, and you press that button, you
>> just get a "boink'.   So it is a good way to see if you have left it in
>> split mode when you don't want to be there.
>> 73, Steve KW3A
>>
>>
>> ----- Original Message ----- 
>> From: "Rick" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, May 11, 2010 10:46 AM
>> Subject: TS-2000 and split.
>>
>>
>>> Hi list.
>>> Could some one please tell me how to do split operations on the TS-2000?
>>> If I understand right, you put the receive frequency on VFO a, and the =
>>> transmit frequency on VFO B and hit split.
>>> But I haven't found A reliable way to tell what VFO I'm on.
>>> I haven't played with it much though.
>>> Thanks in advance for any help, and 7 3.
>>>
>>
>