Subject: | |
From: | |
Reply To: | |
Date: | Wed, 8 Apr 1998 14:11:39 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
First thanks to all those who replied along witho Desmond Reid: Larry
Koester, Will Stephenson and Jim Meager
>I just upgrade and/or built a new sytem in the past months and that is the
>same prol;em tha I had.
>But I do know one thing. you need to have more information in your
>autoexec.bat file and the config.sys. First you need to tell us what speed
>hard dive you have and also who the manufacturer of the drive is and them
>find the driver for that drive. You need to put the mscdex.exe file on the
>boot disk.
>
>sample config.sys device=a:\ccd.sys /d:cdrom /p:260 /t:2
>sample autoexec.bat a:\mscdex.exe /d:cdrom
>
>I hope this helps some
>
>Desmond
>> I am still trying to install Win95B from cd to:
>> Acer AP5T TX mobo
>> 32 mgs SDRAM
>> Intel Pentium 100 cpu
When i boot from floppy A:, i get:
verifying dmi pool data
Starting windows 95
UsDrives ide bus cd-rom device driver version 1.97
Unit 0 base address 170 drive 0 device version=tw240d 1.10
Using 32bits access
Device driver name=cd003
cd-rom driver installed
A:\>mscdex.exe
Usage: mscedex [/e/k/s/v] [/d:<driver>... ] [/L:<letter>] [/M:<buffers>]
What i have in config.sys
Device=himem.sys
Device=usdide.sys
What i have in autoexec.bat is:
mscdex.exe.
When i ask for drive d:, i get invalid drive specification
Now, i believe some of that info above is to be put in config.sys and/or
autoexec.bat, but don't know exactly where..
This cd drive is a Usdrive 24x
Thanks again
--
|
|
|