Subject: | |
From: | |
Reply To: | |
Date: | Tue, 31 Mar 1998 19:48:55 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have the Promise Ultra33 installed and it recognizes the 6.4 WD hd. I
used fdisk to set up the primary partition, logical drives, and set the
primary partition active.
Formatted the new drives and the primary drive was formatted using the
/s switch.
I have both hard drives connected to the controller card with the old hd
as the primary and the new hd as the secondary; the CD Rom is still
attached to the mb.
Copied the contents of the old hd using the following command:
xcopy c:\*.* d:\ /r /i /c /h /k /e /y
I switched the cables to make the new hd the primary and I can't get Win
95 to load. It stops at the 2nd bios screen. As long as I have my old
hd as the primary, Win 95 loads.
Called WD tech and they suggested I zero the hd and install everything
fresh. There has to be a better solution. Does anyone have it?
Also, my original hd is over 2 yrs old and with the controller card it
is as slow as molasses. Though I haven't timed it, I would say that it
is taking Win 95 twice as long to install, Netscape 2x-3x longer. The
Promise people said they noticed an increase in performance???
Any ideas as to what this is all about.
Thanks for all your assistance
Dave Littlehale
|
|
|