Hello Tom,

I wrap the connector with tape then apply the sealer. If I have to get to 
the connector later the tape makes it easier to remove the sealer without a 
big mess.

John  KC2QJB


----- Original Message ----- 
From: "Kevin Nathan" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, August 25, 2010 9:04 AM
Subject: Re: best strategy for sealing outdoor coax connections


> Hi Tom,
>
> I've never used both.  If I can get it, I use the coax seal.  It's a mess 
> if
> you ever want to undo the connection but I find it works well and you can
> spread it with your fingers into those tight places where you can't seem 
> to
> wind tape.
>
> Very 73 and I'm looking forward to hearing you back on again.
>
>
>
> Kevin :)
> Amateur Radio:  K7RX
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of tom behler
> Sent: Wednesday, August 25, 2010 04:44
> To: [log in to unmask]
> Subject: best strategy for sealing outdoor coax connections
>
> Hi, all.
>
> As you know, I am awaiting some antenna help, and once that help arrives, 
> I
> should be able to get some antennas up here at the Michigan qth.
>
> I'm planning to use the Diamond X200A and Alpha Delta DXCC that I used out
> in Colorado for VHF/UHF, and HF respectively.
>
> I also purchased a Carolina Windom 160 compact from Radioworks, which I 
> plan
>
> to run at right angles to the DXCC if I can, which hopefully may help me 
> out
>
> a bit on the lower bands--namely 80 and 160.  Actually, I have never been 
> on
>
> 160, which is also part of the motivation for purchasing the Carolina 
> Windom
>
> 160 compact.
>
> Anyway, I know this topic has been discussed before, but can't remember 
> how
> the issue was resolved.
>
> What is the best way to seal outdoor coax connections?  I have some Radio
> Shack coax seal here, plus some electrical tape, but I can't remember
> whether it's best to put the coax seal on first, followed by the tape, or
> put the tape on first, followed by the coax seal.
>
> I just want to do things right the first time, if you know what I mean.
> (smile)
>
> 73 from Tom Behler:  KB8TYJ
>