Tom, I would love to get together and relearn how to do that. I did it
once, but that was all and it has been 5 years.
----- Original Message -----
From: "tom behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, April 13, 2010 7:25 PM
Subject: Re: LDG Breakout Box
> Butch:
>
> I thought of that too.
>
> I tell you, I have one of those rig-runners from West Mountain Radio for
> my
> various DC connections, and I could now kick myself for not having gotten
> one years ago.
>
> Putting the Anderson power pole connections together are also a real snap,
> now that I have one of the crimping tools.
>
> 73 from Tom Behler: KB8TYJ
>
> ----- Original Message -----
> From: "Butch Bussen" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, April 13, 2010 12:33 PM
> Subject: Re: LDG Breakout Box
>
>
> The only thing to be aware of is the current rating of that connector.
> If all you want is power, why not just come off of your 12v supply?
> 73
> Butch Bussen
> wa0vjr
> open Node 3148
> Las Vegas
>
>
> On
> Tue, 13 Apr 2010, Fred Adams wrote:
>
>> Tom, I am just like you and I am also trying to find out. If I
>> understand
>> it correctly, I would like to plug the 7 pin din connector into the 13
>> volt
>> recepticle in back of my radio and run several things from it. I would
>> like
>> to run my LDG auto tuner, my old Stone mountain QSYER and RF APPLICATIONS
>> swr watt meter from the breakout box. If this can't be done, I hope
>> someone
>> will set me straight.
>> ----- Original Message -----
>> From: "tom behler" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, April 13, 2010 10:11 AM
>> Subject: Re: LDG Breakout Box
>>
>>
>>> Hey, Fred.
>>>
>>> Just curious. .... What's the break-out box?
>>>
>>> Not that I need a new piece of equipment right now, but it might be fun
>>> to
>>> think about. (grin)
>>>
>>> 73 from Tom Behler: KB8TYJ
>>>
>>> ----- Original Message -----
>>> From: "Fred Adams" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Tuesday, April 13, 2010 3:09 AM
>>> Subject: LDG Breakout Box
>>>
>>>
>>> Could one of you guys e-mail me the phone number of LDG Electronics? I
>>> thought I had the number but can't find it and I couldn't find it on the
>>> web. I want to talk to someone there about the breakout box and see if
>>> it
>>> can be used with my ICOM 775DSP. It seems to me that I could use it but
>>> before I put my money into it I want to be sure. Thanks much,
>>>
>>>
>>>
>>> Best wishes,
>>>
>>>
>>> FRED C. ADAMS W4HC
>>> IN 2010 VOTE OUT ALL
>>> POLITICAL INCUMBENTS
>>
>>
>
|
