Thanks, I knew it had something to do with the VFO knob, but wasn't sure how 
it worked.
7 3.
----- Original Message ----- 
From: "steve" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, November 20, 2009 8:33 AM
Subject: Re: TS-430 and split.


> Rick,
>
> You don't use rit for this.  Use the VFO knob which is the 4 position knob
> just to the right of the display window.  First position( all the way to 
> the
> left) listens on vfo A and transmits on vfo B.   Second position is rx and
> tx  both on vfo A , third position is rx and tx on vfo b, and the fourth
> position  is rx on vfo B and tx on vfo A ( just the opposite of the first
> position.
>
> So the DX is transmitting on 14015  and this will be your rx freq.  He is
> listening up 5, so you want to tx on 14 020.   Set knob to second position
> (vfo A) and tune to 14.015 for your rx freq.  Now turn the knob to the 
> third
> position (vfo B) and tune to 14.020 for your tx freq.  Now set the knob to
> the first position  and the rig will rx on  14.015 and tx on 14.020.
>
> When finished working split, remember to  return the knob to either 
> position
> 2 or 3 to get back into single vfo operation.    Sounds more complicated
> than it really is.  It's a nice rig, had one here since 1987, but don't 
> use
> it much anymore.
>
> 73, Steve KW3A  ----- Original Message ----- 
> From: "Rick" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, November 20, 2009 7:20 AM
> Subject: TS-430 and split.
>
>
>> Hi list.
>> Does anybody know how to work split with the TS-430?
>> The other day I heard a guy on 20 working split.
>> I moved the rig up 5 where he was listening and used rit to move the =
>> receive down, but it doesn't seem to go far enough.
>> Thanks in advance for any help and 7 3.
>>