Subject: | |
From: | |
Reply To: | |
Date: | Tue, 2 Feb 2010 19:24:01 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
The first time, I drilled holes through the house just above the foundation.
Then put a couple of those honkin' ten-inch feedthroughs through there. Now
I need to put more wire out there so need to do something else. I have
glass block windows; this one happens to have pull-out window and screen in
the middle. I was going to cut a piece of plexiglass to fit where the
screen was and put some feedthroughs through it. But if something already
exists, ... ...
<HT> WA9RYF
----- Original Message -----
From: "Butch Bussen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, February 02, 2010 9:53 AM
Subject: Re: RG 174 Jumpers?
> What I did here is put two pieces of foam rubber together, (long thick
> strips), and run the cables between them and then close the window which
> makes a fairly good seal.
> By the time you go through adapters and connectors, you'll have a good bit
> of loss.
> 73
> Butch Bussen
> wa0vjr
> open Node 3148
> Las Vegas
|
|
|