Subject: | |
From: | |
Reply To: | |
Date: | Thu, 6 May 2010 22:37:41 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
the stripers have 2 blades, one that will cut through to the center
conductor, then about a half inch or so back, one that will just cut the
outer jacket. So, yes there are 2 blades in there.
----- Original Message -----
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, May 06, 2010 6:10 PM
Subject: Re: Coax work
> there are quite a few options there, which strippers and crimpers are at
> question here?
> I didn't see any strippers or crimpers that claimed they worked on both
> RG58
> size up to 213/lmr400/9913 size etc.
> I suppose one would have to have a pair in hand to really understand, but
> how does the stripper cut both the outer jacket, and the inner insulator
> at
> the same time without compremising the shield braid?
> or perhaps it cuts the outer jacket a ways back from the spot where it
> cuts
> through to the center conducter....you need some braid with the center
> insulator to crimp the ground portion of the connecter on to right.
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "Ed Malmgren" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, May 06, 2010 9:48 AM
> Subject: Coax work
>
>
>> Butch, You can see the crimpers/strippers at www.therfc.com
>> 73 Ed K7UC
|
|
|