it's menu item 4. As I recall, some menu items are eliminated if you're on 
VFO, or memory, but VFO was the best starting point for good menu 
references. I'd be able to tell you actual clicks from 1 if I had mine in 
line but I haven't used it in a very long time but I believe the low beep is 
menu item 1. IF you can hook up both radios at once, you can figure out 
which one has the menu setting different but it's not too hard a radio to 
use. The default is where it selects memory channels by band, so you must 
have changed the one that's not that way unless you got it used. Someone on 
this list got one form me, if it was you that explains it because I had mine 
setup that way. I used to have 2, I still have one.
----- Original Message ----- 
From: "Louis Kim Kline" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, April 21, 2009 10:48 PM
Subject: Re: Question on Kenwood TMG707A


> If you wouldn't mind, I think I'd like to change the newer radio to match
> that setting on the other radio.
>
> Thanks, and 73 in advance.
>
> --Lou K2LKK
>
>
>
> At 10:24 PM 4/21/2009 -0400, you wrote:
>>it's a menu setting, I forget which one but can look it up if you want and
>>don't have the manual or anything. It's a low number, I remember that.
>>----- Original Message -----
>>From: "Louis Kim Kline" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Tuesday, April 21, 2009 7:43 PM
>>Subject: Question on Kenwood TMG707A
>>
>>
>> > Hi.
>> >
>> > I'm kind of puzzled about something that I've noticed about the Kenwood
>> > TMG707A.  I have two of these radios, one is probably somewhat older 
>> > than
>> > the other.
>> >
>> > On the new one that I bought as a new radio, when I click through the
>> > memories, I see all of the memories that have been assigned, regardless 
>> > of
>> > which band the VFO is on.  On the radio that I bought as a used radio, 
>> > I
>> > only see the memories for the band that my VFO is on.  This second
>> > approach
>> > is actually a little more useful.
>> >
>> > My question is this:  Does anyone know why I am seeing the discrepancy
>> > between the two radios?  Is it a menu setting, or was there a firmware
>> > revision that is responsible for it?
>> >
>> > 73, de Lou K2LKK
>> >
>> >
>> >
>> > Louis Kim Kline
>> > A.R.S. K2LKK
>> > Home e-mail:  [log in to unmask]
>> > Work e-mail:  [log in to unmask]
>> > Work Telephone:  (585) 697-5740
>
> Louis Kim Kline
> A.R.S. K2LKK
> Home e-mail:  [log in to unmask]
> Work e-mail:  [log in to unmask]
> Work Telephone:  (585) 697-5740