BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
For blind ham radio operators <[log in to unmask]>
Date:
Sat, 9 May 2009 21:22:29 -0400
Reply-To:
For blind ham radio operators <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
In-Reply-To:
Content-Type:
text/plain; format=flowed; charset="iso-8859-1"; reply-type=original
From:
John Miller <[log in to unmask]>
Parts/Attachments:
text/plain (95 lines)
MY TW1 and TW2 both came with just a cord with the connector on one end and 
bare wires on the other, I put power poles on it so I can plug it in to my 
power supply here. No wall wart, but that's fine with me, I'd rather hook it 
up to the power supply.
----- Original Message ----- 
From: "jim johnson" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, May 09, 2009 9:10 PM
Subject: Re: Power jack for LDG TW1 METER


> well I just bought a new tw1 and it just came with a cord with a jack on 
> it.
> No ac adapter.  When I bought my tw2, it came with one.  Good luck with 
> it.
> Jim wb4kmq
>
> ----- Original Message ----- 
> From: "Fred Adams" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, May 09, 2009 9:07 PM
> Subject: Re: Power jack for LDG TW1 METER
>
>
>> Jim, thanks much, I believe you have given me the info I need.I 
>> accidently
>> found a used TW1 without the wall wart.  I have several proper wallwarts
>> but
>> with wrong connector.  I need to pick up the proper connector for one of
>> my
>> wallwarts.  I called LDG but they say they no longer carry the TW1 and 
>> TW2
>> wallwarts.
>> ----- Original Message ----- 
>> From: "jim johnson" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Saturday, May 09, 2009 8:55 PM
>> Subject: Re: Power jack for LDG TW1 METER
>>
>>
>>> Fred, I have the tw1 and here is all the manual says.  I do not know if
>>> there is a proper name for these but here is the size for a match:
>>> Your TW-1 requires 12 volts DC at 200 ma. Connect a suitable power 
>>> supply
>>> to
>>> the 2.5 x 5.5 mm
>>> coaxial DC input jack using the provided 2.5 x 5.5 mm jack coaxial power
>>> connector (center
>>> positive).
>>> Hope this helps.
>>> Jim wb4kmq
>>>
>>> ----- Original Message ----- 
>>> From: "Fred Adams" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Saturday, May 09, 2009 8:31 PM
>>> Subject: Power jack for LDG TW1 METER
>>>
>>>
>>>>  Could someone tell me what the power jack that plugs in the back of 
>>>> the
>>>> LDG TW1 talking WATT SWR meter is called?  I need to buy a couple of
>>>> jacks
>>>> that are the same as the power for the     TW1 but I do not know what
>>>> they
>>>> are called.  Thanks much,
>>>>
>>>>
>>>> Best Wishes,
>>>>
>>>>
>>>> THE HOUR IS LATE AND
>>>> THE NIGHT IS FAR SPENT
>>>
>>>
>>> --------------------------------------------------------------------------------
>>>
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.5.325 / Virus Database: 270.12.23/2106 - Release Date:
>>> 05/09/09
>>> 06:54:00
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.325 / Virus Database: 270.12.23/2106 - Release Date: 05/09/09
> 06:54:00 

ATOM RSS1 RSS2