Subject: | |
From: | |
Reply To: | |
Date: | Thu, 3 Sep 2009 23:07:37 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi,
If the information is correct what i found on the internet about your
mobo...
than you have 4 sata connectors and 2 ide connectors onboard...
the white en blue connector is de ide connectors.
if you have a CD of DVD rom installed than you can disconnect one of the to
put the HD in it..
Greetings, Anne
----- Original Message -----
From: Phillip Williams <[log in to unmask]>
To: [log in to unmask]
Date: Thu, 3 Sep 2009 15:40:59 -0400
Subject: [PCBUILD] SATA and IDE on same pc
> Greetings all,
>
> I have a pc with SOYO Dragon2 mobo, 3.2 p-4 cpu, 2gig ram, an Axle
> GeForce FX 5500 256MB/ 128 bit video card, a Creative Audigy 2zs pro
> sound card, a WD 10,000 rpm HD running xp home sp2 and I have Adobe
> Audition software for recording, mixing and mastering.
>
> I have a used WD 600 60gig 7200 rpm IDE HD that I would like to add
> to this pc for the porpose of recording a live band from a mixing
> console. I will probably use a tv@nywhere capture card to interface
> with the mixing console unless someone knows of a better route to take
> with my available hardware.
>
> My main question is what is the best way to attatch the IDE to my pc?
> The mobo is SATA only. I have a 3 port firewire card I can install but
> most all the affordable external cases I looked at are usb 2.0. Would
> I be better off with an internal adapter card or one of the adapters
> that connects directly to the HD?
>
> Unfortunately, cost is a consideration. The adapters and cases I'm
> considering run about $25.00 and I don't think I can afford much more
> than that.
>
> Thanks for any suggestions,
>
> -Phil Williams-
>
> Do you want to signoff PCBUILD or just change to
> Digest mode - visit our web site:
> http://freepctech.com/pcbuild.shtml
>
>
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml
|
|
|