I'm not sure where you came up with this address, but here is a quote
from the linksys manual.
To access the web-based utility, launch Internet Explorer or Netscape
Navigator, and enter the Router?s default IP
address, 192.168.1.1, in the Address field. Then press Enter.
A password request page, shown in Figure 6-1 will appear. (non-Windows
XP users will see a similar screen.)
Leave the User Name field blank. The first time you open the Web-Based
Utility, use the default password admin.
(You can set a new password from the Administration tab?s Management
screen.) Then click the OK button.
I'm not around much on week ends, but during the day Monday through
Friday, I can lend a hand if you want to give me a call. Phone is 702
255-4388
73
Butch Bussen
wa0vjr
open Node 3148
Las Vegas
On Fri, 8 Jan 2010, pat
gormley wrote:
> Al I will be in a position to give you the information you are seeking on
> Sunday because I'm about to do the same thing. First of all, you don't need
> to do anything from the hardware side. You can do it from within internet
> explorer. type http://191.91.92 and this is where my knowledge ends at this
> point. I'll know more Sunday and when I have configured everything, I'll
> tell you what I've done. 73- pat kk3f
> ----- Original Message -----
> From: "Albert Sanchez" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, January 08, 2010 11:32 AM
> Subject: EchoLink help needed
>
>
>> Hi List
>> I am trying to configure my Linksys WRT54 router for EchoLink and need =
>> help. I am running XP with sp3. I need the steps to set the port =
>> forwarding.
>> TNX
>> 73, Albert, W A 7 F X B / 4
>> Greenville NC
>> EchoLink node: 75240
>> Al's Piano Tuning & Repair
>> 215 John Avenue
>> Greenville, NC 27858-4113
>> 252-757-3023
>>
>
>
|