I've learned over the years that getting my programming cables on eBay is
generally the best bet, I usually aim for kawamall listings but there are
others just as good. I just frequent them because though they send a lot of
emails confirming your order and all, most being junk, that's all you get
from them and the cables come fast, are quality and I have yet to have one
fail, I even have their Motorola RIB and find it works on radios that
nothing but Motorola RIB's work.
----- Original Message -----
From: "Danny Dyer" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, April 28, 2009 9:51 PM
Subject: Re: Icom 703 With Ham Radio Deluxe
> Hi Eric, it'll _have to be HRD, as Commander _only works with the
> Yaesus/made for the 817, but may also work with 857&897.
> You'll need a programming cable, and although Icom makes one, it's
> designed
> to be used with several radios, sells for around a hundred dollars, and
> you
> can do much better price wise for a cable designed to work with one radio
> at
> a time.
> if you want sirial look for the Radioshack Catalog Number 20-289
> which is a scanner programming cable which will definitely work with the
> 703, series, the 706 series, and possibly the 7000 series/maybe even
> others.
> as discussed and used by several of us earlier on the blind hams
> list.which
> they were closing out at under five dollars, in may 2007. For a USB
> cable,
> the cheapest by a long shot I've found, comes from Valley Enterprises, an
> Ebay Store./I bought one of their cables for the 817, for the same price
> as
> the one for the Icom, and it works as advertised. I plan to get one of
> their Icom cables for my 706Original. I'm sorry that I don't know the
> model
> number, but do a search at that store, the cable is the same one for
> programming the 706 series of radios, and sells via paypal for 19$s&Change
> Delivered, USA.
> The C-IV number is different for each series of Icom Radios/but the same
> for
> each radio in that series. You have to make sure the baud rate and civ
> settings are configured for the radio in question, both with a computer
> and
> with the Millenium QSYER.
> By the way, I don't think that the Brit Keypad will work with the 703,
> although check your manual, I've never had my hands on one of the Brit
> Keypads.
> HTH and enjoyed talking with you..
> ----- Original Message -----
> From: "Eric Clegg" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, April 28, 2009 9:13 PM
> Subject: Icom 703 With Ham Radio Deluxe
>
>
>> Hello listers:
>> Has anyone on this list been able to successfully program an Icom Ic703 =
>> with ham radio deluxe?
>>
>> I'm considering purchasing a qrp radio and I've heard that the original =
>> commander software for the Yaesu FT817 does not really work reliably =
>> with Jaws.
>>
>> Any helpful comments would be appreciated.
>>
>> Also I understand when using a Millenium qsyer keypad with the Icom =
>> IC703 that some menu options on the radio have to be adjusted. It's not =
>> just a matter of plugging the keypad into the Icom and having it work.
>>
>> I already have a Millenium Qsyer and the British made Radio Mate keypad =
>> that will work with the Yaesu.
>>
>> Thanks for the assistance.
>>
>> 73,
>>
>> Eric
>> KU3I
|