Subject: | |
From: | |
Reply To: | |
Date: | Sun, 26 Jul 2009 12:41:58 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi! To reset the VX7 R to factory defaults and wipe out all memories, do
the following:
1. Hold down the 4 key, the V/M key and the BAND key.
On the lower part of the radio, the keypad is 5 keys wide by 3 keys high.
The 4 key is the second key from the left in the middle row. BAND is the
top key in the right column. The V/M key is the bottom key in the right
column.
Turn the radio on while holding down these three keys.
2. Wait a minute to make sure that it turns on. Hopefully, it will beep.
Then press the MON/F key to finish the process. This key is the left most
key in the top row of the 3 x 5 keypad.
Hope this helps.
Also, I use that shareware program, VX7 commander to program my radio. It
is VERY finicky with serial to USB converters. I have cables from a place
called TTL2USB.com. They work, but it still take a number of attempts to
get it to work.
Good luck! Write if you need more info.
Nora Nagle
KB1OHB
|
|
|