you can make that wire work, you might just want to use a small screw driver
and gently help the metal contact in it's slot, I did. If you have the rig
runner, that's fused, it will be fine. You could add fuses though if you
want, it's not hard.
----- Original Message -----
From: "Richard Fiorello" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, April 21, 2009 8:12 PM
Subject: anderson power poles
> Hello;
> Thanks everyone for the good info. When I get ready to sit down and =
> start connecting things I will let you know how things work out. I had =
> planned to put power poles on the d c cable for the ldg tw1 but that =
> wire looks like it might almost be to thin. I wish the cable were =
> fused.
> Richard