I got it from W4RT.com, where I ordered the TW1. It cost me $12 extra.
73 from Tom Behler: KB8TYJ
----- Original Message -----
From: "Butch Bussen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, October 02, 2008 6:22 PM
Subject: Re: several TW1 questions
> Where did you get the wall wart? a e s said they don't even show one.
> 73
> Butch Bussen
> wa0vjr
> open Node 3148
> Las Vegas
>
>
> On
> Thu, 2 Oct 2008, T Behler wrote:
>
>> Well, John, I ordered the wallwart anyway, since the description on
>> the
>> W4RT web site didn't indicate that a power cable would be provided. ...
>> It
>> was only an extra $12.
>>
>> I do like your idea, though of hooking it directly to the Astron, so I'll
>> just have to see what comes with it and go from there.
>>
>> 73 from Tom Behler: KB8TYJ
>>
>> ----- Original Message -----
>> From: "John Miller" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Thursday, October 02, 2008 8:03 AM
>> Subject: Re: several TW1 questions
>>
>>
>>> I don't know why, but some people got it with a wallwart plug, others,
>>> like
>>> myself got it with a power cable with the right connector for the tuner
>>> on
>>> 1
>>> end and bare wires on the other. Naturally, I hooked it to my Astron
>>> power
>>> supply with everything else in my station. Personally I think it's
>>> better
>>> that way anyway, let chance of a ground loop by my way of thinking, and
>>> based on that, you can run it on a battery if you wanted to. I leave
>>> mine
>>> hooked up 24/7, the TW2 I don't, because I have too much loss on UHF as
>>> it
>>> is and that's just more, but the TW1, I leave in line all the time. You
>>> could run the full 100 watts through it for tuning if you wanted to, but
>>> it
>>> could be hard on the radio that way. No more than with out it, though.
>>> ----- Original Message -----
>>> From: "T Behler" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Thursday, October 02, 2008 7:01 AM
>>> Subject: several TW1 questions
>>>
>>>
>>>> Hi, folks.
>>>>
>>>> I think I'll be getting my new TW1 today, and I just have a few
>>>> questions
>>>> I
>>>> want to be clear on before trying to use it. I know these questions
>>>> are
>>>> elementary, but I just want to be sure I'm on the right track with a
>>>> few
>>>> things:
>>>>
>>>> 1. From the manual, I assume the TW1 is powered only by AC power,
>>>> using
>>>> the
>>>> recommendedWalwart supply. Is that correct? In other words, there's
>>>> no
>>>> provision to use it with batteries?
>>>>
>>>> 2. Would I be able to keep the TW1 in line at all times, rather than
>>>> having
>>>> to connect and re-connect it to take needed measurements? I believe
>>>> the
>>>> answer is yes, but I just want to be sure.
>>>>
>>>> 3. Finally, can I use the TW1 at the full 100 watts for tuning
>>>> purposes?
>>>> Again, I think the answer here is yes, but I remember the old days of
>>>> the
>>>> Conway tuning aids where if you used 100 watts to tune, all sorts of
>>>> interesting things happened, including letting the smoke out of the
>>>> unit.
>>>> (grin)
>>>>
>>>> Thanks for putting up with these questions. I just want to be sure I
>>>> start
>>>> off on the right foot here.
>>>>
>>>> 73 from Tom Behler: KB8TYJ
>>>
>>
>>
>
|