Yes it must be terminated. You should be able to get an inline terminator.
It is inserted between the end of the external SCSI cable attached to your
computer and your scanner.

 CPU ------------------------ Terminator-Scanner

Hope This Helps. Good Luck. Regards,

David Brenner

=================================
David Brenner, Ph.D.     [log in to unmask]
=================================

-----Original Message-----
From:   Rick Fogel [SMTP:[log in to unmask]]
Sent:   Tuesday, February 03, 1998 12:30 PM
To:     [log in to unmask]
Subject:        SCSI TERMINATORS

I have an Advansys 940u scsi card and an internal phillips cdd2600 cd-r
insatlled on my computer . It is a pent.166mmx running win 95. Everything
is finally working here but when i tried to hook up my Artec Viewstation
scanner it will not recognise it. The scanner is set to device 6 and the
cd-r is set for 2. I was told this card is self terminating. Do i still
need to terminate the scanner? I have tried to find a terminator with no
success.Can i make one? Can i use just another scsi cable hooked to the
scanner as a terminator?
                                           Thanks,
                                     Rick Fogel


          PCBUILD:  http://nospin.com  or  [log in to unmask]