Hi Tom,

Does the longer cord not connected to anything have the female 8 pin on one
end and the modular RJ45 on the other or did he give you the adapter from 8
pin to modular?  I'm just curious.  John's info on where the plugs go is
right.

Take care and very 73. 


Kevin :)
Amateur Radio:  K7RX



-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of T Behler
Sent: Sunday, April 27, 2008 16:22
To: [log in to unmask]
Subject: Need help with MC60 mic connections

Hi, all.

Well, today, I finalized the trade I was talking about involving my old
plain Icom 746, for a slightly-used TS480, which includes a correctly wired
MC60 desk mic.

But now, I need some orientation to the MC60 desk mic.

On the right-hand side of the mic stand, there's a wire coming out with an
8-pin plug on it, but on the back left-hand corner of the mic stand, there's
another 8-pin female connector.  In the box with the mic, there's a cable
that has an 8-pin male connector on it, and the standard Kenwood mic
connector on the other.

Can someone tell me what goes where?

I certainly could call the guy who I did the swap with, but thought you guys
might give me a better orientation.

Just don't want to do something that would risk hurting anything.

73 from Tom Behler:  KB8TYJ

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.5/1399 - Release Date: 4/26/2008
14:17
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.5/1399 - Release Date: 4/26/2008
14:17