what you should have, is a mic cable with 2 female connectors on it, which
goes form the connector on the back of the mic to the radio, then the wire
coming out with the female connector on it should plug in to the mic itself.
If you have something different, that's been modified but hopefully that
helps.
----- Original Message -----
From: "T Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, April 27, 2008 7:21 PM
Subject: Need help with MC60 mic connections
> Hi, all.
>
> Well, today, I finalized the trade I was talking about involving my old
> plain Icom 746, for a slightly-used TS480, which includes a correctly
> wired
> MC60 desk mic.
>
> But now, I need some orientation to the MC60 desk mic.
>
> On the right-hand side of the mic stand, there's a wire coming out with an
> 8-pin plug on it, but on the back left-hand corner of the mic stand,
> there's
> another 8-pin female connector. In the box with the mic, there's a cable
> that has an 8-pin male connector on it, and the standard Kenwood mic
> connector on the other.
>
> Can someone tell me what goes where?
>
> I certainly could call the guy who I did the swap with, but thought you
> guys
> might give me a better orientation.
>
> Just don't want to do something that would risk hurting anything.
>
> 73 from Tom Behler: KB8TYJ
>
|