Danny, one more thing to ad to your notes is how to
delete (clear) unwanted
call memories. The procedure is similar to deleting a
regular memory
(000-499) except you only press the call button twice
(see below).
To delete (clear) a call memory you follow the same
procedure used to store
a call memory, except after you have the call memory
selected you press the
call button twice then press and hold the memory key.
To clear a regular memory you first select the memory
000 - 499 (or 00 - 99
in memory bank mode), then press and hold the memory
key until after the
second beep. Now press the call button 4 times and
then press and hold the
memory key until you hear the Beep-DoubleBeep
Pressing the call key in the above steps cycles
through these options:
Bank,Name, Skip, Clear.
...-.-
73, Ken -N5SWR
There are 10 types of people in the world, those who
understand binary and
those who don't.
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]]
On Behalf Of Danny Dyer
Sent: Tuesday, March 18, 2008 12:54 PM
To: [log in to unmask]
Subject: Re: T90A,CallChannelProgrammingHelp_Please
Hi Kenneth, _That Worked! Thanks So Much! I'll
insert your instructs in my
quickguide and in my manual! Again Sir, _As Always,
Thanks So Much! Danny.
----- Original Message -----
From: "Kenneth Lee" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, March 17, 2008 3:15 PM
Subject: Re: T90A,CallChannelProgrammingHelp_Please
> Danny, I've been experimenting with my T90 and I
think I have the call
> channel programming figured out.
>
> First, there are 5 call channels, C0 - C4 and to
program one you first
> start at memory 000 then press vfo and program the
vfo.
> Then press and hold the
> memory until the second beep (the first beep is
short and the second
> beep is longer). Now click the tuning dial left
once to get to c4 or
> 5 times to get to c0. Once you have selected the
calling memory press
> and hold the memory and you'll hear a beep followed
by 2 quick beeps.
> Now you access the calling memories by pressing the
call button until
> you get to the call memories. The call button
(bottom right button on
> keypad) will cycle
> between TV, WX, Call memories and in that order.
>
> Hope this helps,
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
|