Thanks, John.

Tom Behler:  KB8TYJ

----- Original Message ----- 
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, March 13, 2008 5:09 PM
Subject: Re: rig runner question


> They're all fused at 40 amps, but they can go higher than that by a little
> if you like, they've been tested at higher than that.
> ----- Original Message ----- 
> From: "T Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, March 13, 2008 4:57 PM
> Subject: Re: rig runner question
>
>
>>    Richard:
>>
>> The basic rig runner is probably all that I'd need, although I'd have to
>> check out the amperage ratings just to be sure.
>>
>> Time to do some more research.
>>
>> 73 from Tom Behler:  KB8TYJ
>>
>> ----- Original Message ----- 
>> From: "Richard Fiorello" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Thursday, March 13, 2008 4:53 PM
>> Subject: Re: rig runner question
>>
>>
>>> Hi Tom;
>>> There are a number of different versions which will vary in price
>>> depending
>>> upon the amperage and the number of items you plan to connect. It
>>> basically
>>> lets you connect a number of items via power poles to your power supply
>>> and
>>> each connection is fused and rated for a particular amperage.  I believe
>>> that they start around $70 and move up as the amperage and number of
>>> items
>>> increases.  The basic unit allows you to connect five items.
>>> Richard
>>> ----- Original Message ----- 
>>> From: "T Behler" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Thursday, March 13, 2008 12:44 PM
>>> Subject: rig runner question
>>>
>>>
>>> John or anyone:
>>>
>>> I've heard several folks mention the rig runner as a way to switch
>>> quickly
>>> from AC to DC power, should the commercial power go off.
>>>
>>> What has been everyone's experience with the rig runner, and what is 
>>> it's
>>> approximate cost?
>>>
>>> I seem to recall that this is available at West Mountain Radio too.
>>>
>>> 73 from Tom Behler:  KB8TYJ
>>>
>>>
>>
>
>