Hi Brett,
They were a exact fit. They slid on the coax and were anchored with small
wire ties. The coax was mini 8 of some kind. Gary KB2YAA
----- Original Message -----
From: "Brett Winches" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, December 24, 2007 4:28 PM
Subject: Re: g5rv question
> Are they simply on the coax or how were they laced onto the connection?
>
>
>
> ###
> BRETT WINCHESTER KD7JN=20
> [log in to unmask]
> 208-639-8386
> ###
>
>
> -----Original Message-----
> From: For blind ham radio operators
> [mailto:[log in to unmask]] On Behalf Of gary
> Sent: Monday, December 24, 2007 2:19 PM
> To: [log in to unmask]
> Subject: Re: g5rv question
>
> Hi Brett,
>
> The Ferrite cores are used to keep the output signal from coming back
> through the shield part of your coax. My G5RV had 7 of them on the coax
> at the point of where it intersects the twin lead. Merry Christmas
> Gary KB2YAA
> ----- Original Message -----
> From: "Brett Winches" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, December 24, 2007 11:24 AM
> Subject: Re: g5rv question
>
>
>> Try a D&B SUPPLY or as Butch says farm or electrical supply store. =20
>> =3D20
>>
>>
>> ###
>> BRETT WINCHESTER KD7JN=3D20
>> [log in to unmask]
>> 208-639-8386
>> ###
>>
>>
>> -----Original Message-----
>> From: For blind ham radio operators
>> [mailto:[log in to unmask]] On Behalf Of Butch Bussen
>> Sent: Friday, December 21, 2007 3:53 PM
>> To: [log in to unmask]
>> Subject: Re: g5rv question
>>
>> Well, I don't know where you would buy them there, but back in Kansas=20
>> we had farm supply stores and they had a square plastic insolater made
>
>> for electric fences. I would clip the ladder line in the notches of=20
>> these and tape to the tower leg. I think I've also seen commercially=20
>> made insolaters for this as well. But, with a bit of tape, and these=20
>> were cheap!!!, the electric fence things worked.
>> 73s
>> Butch Bussen
>> wa0vjr
>>
>> On Fri, 21 Dec 2007, T Behler
>> wrote:
>>
>>> Butch:
>>>
>>> What's the easiest way to make stand-offs from the tower?
>>>
>>> What have you and others tried and had success with?
>>>
>>> In my book, simple is best! (grin)
>>>
>>> 73 from Tom Behler: KB8TYJ
>>>
>>> ----- Original Message -----
>>> From: "Butch Bussen" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Friday, December 21, 2007 12:42 AM
>>> Subject: Re: g5rv question
>>>
>>>
>>>> I've run this antenna a log, and I'd run the line down the =
> tower,=3D20
>
>>>> just use something to stand it off away from the metal--don't tape
>> against the leg.
>>>> 73s
>>>> Butch Bussen
>>>> wa0vjr
>>>>
>>>> I'd guess the horizontal run is screwing you up.
>>>>
>>>>
>>>
>>
>>
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.486 / Virus Database: 269.17.5/1191 - Release Date:=20
>> 12/20/2007 2:14 PM
>>
>>=20
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.486 / Virus Database: 269.17.5/1191 - Release Date:
> 12/20/2007 2:14 PM
>
>
|
