I don't think the v71 has a built in tnc.
though i may be wrong.
the d7a has a built in tnc and dual band tx and rx capabilities.
the only other radio that kenwood makes that can be used with sky command
and the ts2000 is the tm D700.
However, if the v71 is anything like the v7a, or the d700 or the ts2000,
they can all be controled on a very limited basis with dtmf codes.
I haven't looked in a long time, and I haven't used the feature in a long
time, but I know you can control certain functions remotely by using the
dtmf codes for the ts2000 and the v7a...not sure about the v71.
73
Colin, V A6BKX
----- Original Message -----
From: "Chris Schulte" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, December 14, 2007 9:04 PM
Subject: Re: sky command codes in text format
> So then I need a tnc for both the th7 and v71? For that matter, I need
one
> or both rigs hooked to a computer? I just want to know how it's all going
> to work. If I have to get the th7, that's not a problem, heck, it's
> actually cheapper.
>
> ----- Original Message -----
> From: "Anthony Vece" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, December 14, 2007 10:49 PM
> Subject: Re: sky command codes in text format
>
>
> > Hi Chris;
> >
> > The F6A will not do what you want it to do.
> >
> > The Sky Command control codes are transmitted with a TNC.
> >
> > They are not transmitted with touchtones and or DTMF tones.
> >
> > The handheld that will work is the TH-D7A.
> >
> > The D7A has a built-in TNC.
> >
> > 73 De Anthony W2AJV
> > [log in to unmask]
> > ECHOLINK NODE NUMBER: 74389
> >
> > ----- Original Message -----
> > From: "Chris Schulte" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Friday, December 14, 2007 5:06 PM
> > Subject: sky command codes in text format
> >
> >
> >> Ok, I'm not sure if Kenwood calls it sky command, or sky commander, and
=
> >> being as how I'm too lazy to look in my tmv--71 manual or my ts-2000 =
> >> manual for the exact name of it, I figured if I made a mistake, I'd be
=
> >> forgiven. =20
> >>
> >> Anyway, does anyone have the control codes for sky command in a text =
> >> format that is readable? I was looking at it in my tmv-71 manual a few
=
> >> days ago, and I can't for the life of me read or understand that table
=
> >> that is in there. =20
> >>
> >> I'm going to be purchasing the THF6A in late january, and want to be =
> >> able to use it to remotely control the 71a. Thanks for any help,
> >> Chris, w8cjs
> >>
> >>
> >
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.17.2/1184 - Release Date:
12/14/2007 11:29 AM
>
>
|
