BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Transfer-Encoding:
7bit
Sender:
For blind ham radio operators <[log in to unmask]>
Subject:
From:
John Miller <[log in to unmask]>
Date:
Fri, 14 Dec 2007 16:39:53 -0500
Content-Type:
text/plain; format=flowed; charset="iso-8859-1"; reply-type=original
MIME-Version:
1.0
Reply-To:
For blind ham radio operators <[log in to unmask]>
Parts/Attachments:
text/plain (76 lines)
The last person I knew who ran 2 tuners ended up throwing himself so far off 
in the end that it wasn't hardly getting a signal out at all. You don't want 
to run 2. Good point on the screw driver though I know a lot of people who 
run a tuner with the screw drivers, some of them, to touch them up a little 
here and there.
----- Original Message ----- 
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, December 14, 2007 4:22 PM
Subject: Re: ts480 question


> You probably don't want to use two tuners.
> For various reasons, but your turbo tuner should tune the screw driver to 
> a
> flat match.
> You lose power through the radios internal tuner, and through an external
> tuner, so adding the internal tuner will just limit your out going rf that
> much more.
> And since your mobile with a small antenna, the more rf you can get out to
> the antenna the better.
> I thought the screw driver was self tuning from 2M to 40M?
> if so then why the need for  a tuner? are you wanting to work 80M as well?
> 73
> Colin, V A6BKX
> ----- Original Message ----- 
> From: "T Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, December 14, 2007 11:26 AM
> Subject: ts480 question
>
>
>> Hi, all.
>>
>> Well, I am anxiously awaiting the arrival of my TS480, and just thought 
>> of
> a
>> question I could use some help with.
>>
>> I'll do my best to verbalize this question in a way that hopefully will
> make
>> sense.
>>
>> As you may recall, I'm going to use the TS480 as my main HF rig in our
> motor
>> home.  I have a Predator screw-driver-type antenna on the back of the
> motor
>> home, and I use something called a Turbo-tuner, made by N2VZ Enterprise 
>> to
>> tune the screw-driver for resonance on my chosen operating frequency.
>>
>> The Turbo-tuner is interfaced with the Ts480 via two cables--one is an
> RS232
>> cable which goes to the front of the radio, and the other is a cable that
>> connects to the AT port on the back of the rig.
>>
>> I am wondering if connecting the turbo-tuner in this way will
> automatically
>> disable the auto-tuner in the TS480.  Or, can the auto-tuner still be 
>> used
>> to further "fine tune" the antenna once it has been tuned by the
>> turbo-tuner.
>>
>> Thanks, and 73 from Tom Behler:  KB8TYJ
>>
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.503 / Virus Database: 269.17.2/1184 - Release Date:
> 12/14/2007 11:29 AM
>>
>>
> 

ATOM RSS1 RSS2