BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
John Miller <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Tue, 27 May 2008 14:02:55 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (79 lines)
In my go kit setups temp setups and all, I find if you stick with dipoles if 
possible, or as was already said, like the mobile screw drivers on tripods 
or how ever you can mount it, making sure there's some kind of counter 
poise, you shouldn't have any TVI problem and if you do, it's not your fault 
though convincing anyone of that is another story. I know I setup what ever 
I want on vacation and sticking with that rule of thumb, in camp grounds, 
little cabins, what ever, I haven't had any problem yet.
----- Original Message ----- 
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, May 27, 2008 12:48 PM
Subject: Re: operating in apartments


> TVI isn't so muchof an issue anymore...not like it used to be.
> The issues now are getting into computer speakers and those crappy bed 
> side
> clock radios and sometimes answering machines and so on.
> You can get into a buildings telephone system as well.  These are usually
> due to bad wiring, poor insulation and shorts in different places, but 
> they
> still happen and most people assume it is the radio operators fault.
> If you have a well designed antenna and some sort of ground system, you 
> will
> probably not have any kind of RFI problems, except for perhaps right in 
> the
> near field of the antenna within your own residence.
> I think using a counter poise can help to bleed off any stray RF...also 
> use
> of a balun and a good Low pass filter will help allot.
> Most modern rigs do use low pass filtering as part of the design, but it
> sometimes isn't quite enough to totally brickwall frequencies above 30MHZ.
> A long wire type of design has inherent RFI issues....as do antennas such 
> as
> J  polls and antennas that have a very very high feedpoint impedance.
> Your best bet for an apartment is some sort of portible vertical or screw
> driver type of antenna out on the balcony or set up in the living room.
> Something that doesn't require miles of ground radials and that is
> relatively efficient...there are quite a few brands like that.
> Especially if you are interested in freqs only up to maybe 40 metres.
> 73
> Colin, V A6BKX
> ----- Original Message ----- 
> From: "Bill Deatherage" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, May 27, 2008 2:34 AM
> Subject: operating in apartments
>
>
>> I was reading the information on the Par end fedz antanna and found it =
>> interesting.  I used to love to work 10 through 40 meeters.  so 20 =
>> meeters would be interesting to me.  one question I thought of was how =
>> much of a problem would a person have wit television interference on =
>> this  band?  I was wondering now that most people use cable and =
>> satellite for television reseption has this minumized the problems =
>> people has had with TVI in the past?  although I have never used it I =
>> heard one problem people who used CB had was CB transmited on 27 mHZ and 
>> =
>> the second harmonic of 27 is 54 the old VHF television band.  I was also 
>> =
>> curious to know does any one know what frequency satellites use to =
>> transmit signals back to televisions?
>> Before I lived in a moble home when I was on 10 through 40 meters.  =
>> since apartments are so much closer together will this increase the =
>> problems I would incounter with TVI?
>> Thank you for the information in advance.
>> Bill WB4YKL
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG.
>> Version: 7.5.524 / Virus Database: 269.24.1/1466 - Release Date: 
>> 5/25/2008
> 6:49 PM
>>
>>
> 

ATOM RSS1 RSS2