Subject: | |
From: | |
Reply To: | |
Date: | Mon, 17 Mar 2008 12:15:16 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Danny, I've been experimenting with my T90 and I think
I have the call
channel programming figured out.
First, there are 5 call channels, C0 - C4 and to
program one you first start
at memory 000 then press vfo and program the vfo.
Then press and hold the
memory until the second beep (the first beep is short
and the second beep is
longer). Now click the tuning dial left once to get
to c4 or 5 times to get
to c0. Once you have selected the calling memory
press and hold the memory
and you'll hear a beep followed by 2 quick beeps. Now
you access the
calling memories by pressing the call button until you
get to the call
memories. The call button (bottom right button on
keypad) will cycle
between TV, WX, Call memories and in that order.
Hope this helps,
...-.-
73, Ken -N5SWR
There are 10 types of people in the world, those who
understand binary and
those who don't.
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]]
On Behalf Of Danny Dyer
Sent: Saturday, March 15, 2008 1:30 PM
To: [log in to unmask]
Subject: T90A,CallChannelProgrammingHelp_Please
How Do You Instruct The Radio To Program A Selected
Freequency From The =
VFO,to The Two Meter Call Channel?
I've Programmed Other Memories By calling for their
number with the =
keypad, but _Haven't yet found the Sequence To Tell
The Radio To Program = A
VFOED Pair Into The Two Meter Call Channel
Position/Second From The = Left
Using The Selector Knob. Any Help _______Greatly
Appreciated, = Thanks,
Danny Dyer, Wb4idu.
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
|
|
|