I don't know about the TM-V7A since I've never used one.

Steve

----- Original Message ----- 
From: "Bobby Druesedow" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, January 06, 2008 21:26
Subject: Re: modifying memory lists in the TMV7A and TMV71A programming 
software


> This only works with the TMV71A not the TMV7A? Right?
>
>
> Bobby Druesedow
> Callsign W5OJT
> Visit my web page at
> http://www.aledobb.com/druesedow
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Dresser
> Sent: Sunday, January 06, 2008 8:20 PM
> To: [log in to unmask]
> Subject: Re: modifying memory lists in the TMV7A and TMV71A programming
> software
>
> Butch,
>
> You do set the option in the software.  Press the Alt key to bring up the
> menu bar, and go to the Setup Menu.  There, you'll find an option called
> "Range of Standard Memories".  This determines whether you're looking at 
> all
> the memories, or at one group; the default is all.
>
> One of the settings for the PF keys is Control.  If you define a PF key as
> Control, you can toggle between controling the radio you're transmitting 
> on,
> or the radio you're just monitoring.  If you press the A volume control
> followed by the Control key, you will be controling the B radio even 
> though
> you can transmit on the A radio.  If you then press the Control key again,
> you'll hear a low beep and you'll be controling the A radio (normal
> operation).  In case you get completely confused, you will always be
> transmitting on whichever radio's speaker the synthesizer comes from.  In 
> my
> operating position, the A radio uses the left speaker, but of course that 
> is
> switchable from the menus.  Note also that the Control function does not
> work if you have muted one of the receivers.
>
> Steve
>
> ----- Original Message -----
> From: "Butch Bussen" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, January 06, 2008 00:35
> Subject: Re: modifying memory lists in the TMV7A and TMV71A programming
> software
>
>
>> Two questions.  First, where do you set this option, I assume you mean
>> in the software.  I've set that already in the radio so I only see
>> stuff in the band I've selected.
>>
>> Second question is about the control function.  I never really
>> understood what it was until you explained it.  If I'm monitoring my
>> repeater on 440 and have switched the control band to two meters, how
>> do I get back in normal mode where I'm controlling the band I'm
>> transmitting on?  I've just been using the volume controls to switch
>> bands.  I never really understood what the control was for.  That does
>> sound kind of cool.
>> 73s
>> Butch Bussen
>> wa0vjr
>>
>> On Sat, 5 Jan 2008, Steve Dresser wrote:
>>
>>> Tom,
>>>
>>> Add the new entries at the end of the group and sort it.  Just
>>> makesure that you have selected the option that allows you to view a
>>> single memory group.
>>> Otherwise, you'll sort everything and make an even bigger mess.
>>>
>>> Steve
>>>
>>> ----- Original Message -----
>>> From: "T Behler" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Saturday, January 05, 2008 13:01
>>> Subject: modifying memory lists in the TMV7A and TMV71A programming
>>> software
>>>
>>>
>>>> Hi, all.
>>>>
>>>> Does anyone have some quick suggestions for modifying memory lists
>>>> in the TMV7A and TMV71A software?
>>>>
>>>> I want to add some repeaters in the middle of a memory list I have
>>>> for both the TMV7a and TMV71A, and hate the thought of having to
>>>> re-enter all of the remaining original data after the new stuff I
>>>> will be adding.
>>>>
>>>> I'm hoping that there is some sort of a copy and paste thing I can
>>>> do to get the job done fairly easily.
>>>>
>>>> 73 from Tom Behler:  KB8TYJ
>>>>
>>>>
>>>>
>>>>
>>>
>>
>>
>>
>>
>
>
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.17.13/1210 - Release Date: 1/5/2008
> 11:46 AM
>
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.17.13/1210 - Release Date: 1/5/2008
> 11:46 AM
>
>
>
>
>