doesn't the radio have to be put into a certain mode though to accept dtmf
commands?
I think the way i worked it before was the radio would receive the dtmf
commands on UHF from the HT, and then you could only control VHF frequencies
and the VHF side of the rig.
Or if you wanted to send commands via VHF, you could control only UHF.
It seems to me there was some silly regulation in the US against controlling
a radio remotely using 2M...
I really can't remember what I did, but i think i had to set my radio up to
activate once a dtfm code was entered from the remote user and then you
could punch in the command to change frequency or power or what ever.
73
Colin, V A6BKX
----- Original Message -----
From: "Chris Schulte" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, December 15, 2007 1:27 PM
Subject: Re: sky command codes in text format
> I found someone that has a link to a web site with the v7 codes in it, I'm
> going to give that a shot. He also said that he didn't see the codes in
the
> v7 manual either.
>
> ----- Original Message -----
> From: "Colin McDonald" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, December 15, 2007 3:22 PM
> Subject: Re: sky command codes in text format
>
>
> > if the v71 manual doesn't have the info, the V7A manual will.
> > obviously the commands are there in the v71's manual, so it must work,
you
> > just need them in a more accessible format...the question of weather it
> > will
> > work or not, is not at stake here.
> >
> > 73
> > Colin, V A6BKX
> > ----- Original Message -----
> > From: "Chris Schulte" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Saturday, December 15, 2007 9:54 AM
> > Subject: Re: sky command codes in text format
> >
> >
> >> That's what I'm looking for, the dtmf codes to remotely control the
> >> radio.
> >> I know a friend that has a v7 and he uses his hand held to control it
> >> remotely using dtmf codes, I was hoping that someone on this list would
> > know
> >> how to do the same thing with the 71. I looked in the manual, and
> >> there's
> >> really not a lot on how to do that. Thnaks and 73,
> >> Chris, w8cjs
> >> ----- Original Message -----
> >> From: "Colin McDonald" <[log in to unmask]>
> >> To: <[log in to unmask]>
> >> Sent: Friday, December 14, 2007 11:13 PM
> >> Subject: Re: sky command codes in text format
> >>
> >>
> >> >I don't think the v71 has a built in tnc.
> >> > though i may be wrong.
> >> > the d7a has a built in tnc and dual band tx and rx capabilities.
> >> > the only other radio that kenwood makes that can be used with sky
> > command
> >> > and the ts2000 is the tm D700.
> >> > However, if the v71 is anything like the v7a, or the d700 or the
> >> > ts2000,
> >> > they can all be controled on a very limited basis with dtmf codes.
> >> > I haven't looked in a long time, and I haven't used the feature in a
> > long
> >> > time, but I know you can control certain functions remotely by using
> >> > the
> >> > dtmf codes for the ts2000 and the v7a...not sure about the v71.
> >> > 73
> >> > Colin, V A6BKX
> >> > ----- Original Message -----
> >> > From: "Chris Schulte" <[log in to unmask]>
> >> > To: <[log in to unmask]>
> >> > Sent: Friday, December 14, 2007 9:04 PM
> >> > Subject: Re: sky command codes in text format
> >> >
> >> >
> >> >> So then I need a tnc for both the th7 and v71? For that matter, I
> >> >> need
> >> > one
> >> >> or both rigs hooked to a computer? I just want to know how it's all
> >> >> going
> >> >> to work. If I have to get the th7, that's not a problem, heck, it's
> >> >> actually cheapper.
> >> >>
> >> >> ----- Original Message -----
> >> >> From: "Anthony Vece" <[log in to unmask]>
> >> >> To: <[log in to unmask]>
> >> >> Sent: Friday, December 14, 2007 10:49 PM
> >> >> Subject: Re: sky command codes in text format
> >> >>
> >> >>
> >> >> > Hi Chris;
> >> >> >
> >> >> > The F6A will not do what you want it to do.
> >> >> >
> >> >> > The Sky Command control codes are transmitted with a TNC.
> >> >> >
> >> >> > They are not transmitted with touchtones and or DTMF tones.
> >> >> >
> >> >> > The handheld that will work is the TH-D7A.
> >> >> >
> >> >> > The D7A has a built-in TNC.
> >> >> >
> >> >> > 73 De Anthony W2AJV
> >> >> > [log in to unmask]
> >> >> > ECHOLINK NODE NUMBER: 74389
> >> >> >
> >> >> > ----- Original Message -----
> >> >> > From: "Chris Schulte" <[log in to unmask]>
> >> >> > To: <[log in to unmask]>
> >> >> > Sent: Friday, December 14, 2007 5:06 PM
> >> >> > Subject: sky command codes in text format
> >> >> >
> >> >> >
> >> >> >> Ok, I'm not sure if Kenwood calls it sky command, or sky
commander,
> >> >> >> and
> >> > =
> >> >> >> being as how I'm too lazy to look in my tmv--71 manual or my
> >> >> >> ts-2000
> > =
> >> >> >> manual for the exact name of it, I figured if I made a mistake,
I'd
> > be
> >> > =
> >> >> >> forgiven. =20
> >> >> >>
> >> >> >> Anyway, does anyone have the control codes for sky command in a
> >> >> >> text
> > =
> >> >> >> format that is readable? I was looking at it in my tmv-71 manual
a
> >> >> >> few
> >> > =
> >> >> >> days ago, and I can't for the life of me read or understand that
> > table
> >> > =
> >> >> >> that is in there. =20
> >> >> >>
> >> >> >> I'm going to be purchasing the THF6A in late january, and want to
> >> >> >> be
> > =
> >> >> >> able to use it to remotely control the 71a. Thanks for any help,
> >> >> >> Chris, w8cjs
> >> >> >>
> >> >> >>
> >> >> >
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> No virus found in this incoming message.
> >> >> Checked by AVG Free Edition.
> >> >> Version: 7.5.503 / Virus Database: 269.17.2/1184 - Release Date:
> >> > 12/14/2007 11:29 AM
> >> >>
> >> >>
> >> >
> >>
> >>
> >>
> >> --
> >> No virus found in this incoming message.
> >> Checked by AVG Free Edition.
> >> Version: 7.5.503 / Virus Database: 269.17.2/1185 - Release Date:
> > 12/15/2007 12:00 PM
> >>
> >>
> >
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.17.2/1185 - Release Date:
12/15/2007 12:00 PM
>
>
|
