that TS-440 will be better on the other setting, I remember trying it with
mine when I had it. I never found anything that sounded good on the high
setting. I should sell my MC-60 but it's in a box buried already so I won't,
not for now.
----- Original Message -----
From: "T Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, May 11, 2008 2:29 PM
Subject: Re: quick mc60 mic question for TS480
> Sounds good, Lou. ... As long as I don't hurt anything by
> experimenting,
> that's what I'll do.
>
>
> The MC60 mic was set on the low setting when I took it out of the box with
> the TS480 stuff, so I am wondering if the guy I bought it from had better
> luck on the low setting.
>
> Will just have to try.
>
> Don't be surprised if you hear me out there at some point today on 40
> meters, although we do need to take the XYL out for Mothers Day dinner,
> which will be happening later this afternoon.
>
> 73 from Tom Behler: KB8TYJ
>
> ----- Original Message -----
> From: "Lou Kolb" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, May 11, 2008 1:12 PM
> Subject: Re: quick mc60 mic question for TS480
>
>
>> Tom,
>>
>> If I remember correctly, toward the bottom of the mic, that is the end
>> with
>> the connector, is t500 ohms or low impedance. toward the head of the mic
>> is
>> 50 k or high impedance. I usually leave it on high impedance for the 440
>> but i don't know what would work best on the 480. Might be a good time
>> to
>> plug in the cans and use the monitor function to see which sounds best to
>> you. Of course, on-air reports would help too. Good luck. Lou
>> ----- Original Message -----
>> From: "T Behler" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Sunday, May 11, 2008 12:59 PM
>> Subject: Re: quick mc60 mic question for TS480
>>
>>
>>> Thanks, John.
>>>
>>> Will experiment with each setting, and let you know how I do.
>>>
>>> 73 de KB8TYJ
>>>
>>> ----- Original Message -----
>>> From: "John Miller" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Sunday, May 11, 2008 12:23 PM
>>> Subject: Re: quick mc60 mic question for TS480
>>>
>>>
>>>> if in the wrong setting your audio will be low. Most HF radios you want
>>>> the
>>>> switch set, I find, toward the back of the mic but it would be just
>>>> like
>>>> them to change it for that radio since a lot of other things are
>>>> chanced
>>>> there but it's worth a try.
>>>> ----- Original Message -----
>>>> From: "T Behler" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Sunday, May 11, 2008 12:00 PM
>>>> Subject: quick mc60 mic question for TS480
>>>>
>>>>
>>>>> Hi, all.
>>>>>
>>>>> I am finally in a position to work with my TS480 and MC60 mic, and
>>>>> came
>>>>> up
>>>>> with a question.
>>>>>
>>>>> Toward the bottom of the mic, there is a switch for what appears to be
>>>>> 2
>>>>> impedence settings--50 and 500.
>>>>>
>>>>> What do these settings do, and which is best for the TS480?
>>>>>
>>>>> What would happen if I got it on the wrong setting?
>>>>>
>>>>> I would like an answer to these questions before proceeding, because I
>>>>> obviously don't want to do any damage to anything here.
>>>>>
>>>>> Thanks as always and 73 from Tom Behler: KB8TYJ
>>>>>
>>>>
>>>>
>>>
>>
>>
>
|