It won't tune with just the usual tune button? That doesn't make sense.
----- Original Message -----
From: "T Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, March 16, 2008 5:57 PM
Subject: activating side tone on TS480 when utilizing the PF key with an
external tuning ddevidce
> Hi, all.
>
> Well, even though it was a bit nippy this afternoon, I got out into the RV
> and tried the TS480 with my Predator screw-driver-type antenna, and the
> N2VZ
> turbo-tuner device.
>
> I programmed the TS480 to activate the turbo-tuner, using the PF key on
> the
> rig, and everything worked with no problem. I do have one question,
> though:
>
> How can I get a side tone, when tuning the Predator using the turbo-tuner
> tuning device and the PF key?
>
> When I tune right now, I get no side tone at all--just silence, as the
> tuning occurs. With my old Icom 718 set-up, I used to get the side tone,
> which at least was a comforting indication that tuning was occurring.
>
> One more interesting observation:
>
> When you program the rig for the Turbo-tuner, you have to hit the PF key,
> which puts the rig in TX-tune mode, and then immediately cut your power
> back
> to 5 watts. I was concerned that I'd have to do this every time, but
> apparently, the 5 watt setting stays saved when doing the TX tune
> function,
> and the rig goes back to 100 watts output once the tuning has been
> completed.
>
> Anyway, we're making progress here, but that side tone when tuning would
> sure be nice.
>
> 73 from Tom Behler: KB8TYJ
>
|