No, I don't have the html stuff from this list, is there a link that you
could quick pass along to me?
73,
Chris, w8cjs
----- Original Message -----
From: "Butch Bussen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, December 16, 2007 12:18 PM
Subject: Re: sky command codes in text format
> It is in the manual, I'll have to look when I get back to Vegas. This
> is not the same as sky command. This is wireless remote, not the same
> thing at all. I think perhaps this is what is causing some confusion.
> If you have the html manual that was put up on this list, wireless stuff
> is in there.
> 73s
> Butch Bussen
> wa0vjr
>
> On Sat, 15 Dec 2007, Chris Schulte wrote:
>
>> That's what I'm looking for, the dtmf codes to remotely control the
>> radio.
>> I know a friend that has a v7 and he uses his hand held to control it
>> remotely using dtmf codes, I was hoping that someone on this list would
>> know
>> how to do the same thing with the 71. I looked in the manual, and
>> there's
>> really not a lot on how to do that. Thnaks and 73,
>> Chris, w8cjs
>> ----- Original Message -----
>> From: "Colin McDonald" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, December 14, 2007 11:13 PM
>> Subject: Re: sky command codes in text format
>>
>>
>>> I don't think the v71 has a built in tnc.
>>> though i may be wrong.
>>> the d7a has a built in tnc and dual band tx and rx capabilities.
>>> the only other radio that kenwood makes that can be used with sky
>>> command
>>> and the ts2000 is the tm D700.
>>> However, if the v71 is anything like the v7a, or the d700 or the ts2000,
>>> they can all be controled on a very limited basis with dtmf codes.
>>> I haven't looked in a long time, and I haven't used the feature in a
>>> long
>>> time, but I know you can control certain functions remotely by using the
>>> dtmf codes for the ts2000 and the v7a...not sure about the v71.
>>> 73
>>> Colin, V A6BKX
>>> ----- Original Message -----
>>> From: "Chris Schulte" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Friday, December 14, 2007 9:04 PM
>>> Subject: Re: sky command codes in text format
>>>
>>>
>>>> So then I need a tnc for both the th7 and v71? For that matter, I need
>>> one
>>>> or both rigs hooked to a computer? I just want to know how it's all
>>>> going
>>>> to work. If I have to get the th7, that's not a problem, heck, it's
>>>> actually cheapper.
>>>>
>>>> ----- Original Message -----
>>>> From: "Anthony Vece" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Friday, December 14, 2007 10:49 PM
>>>> Subject: Re: sky command codes in text format
>>>>
>>>>
>>>>> Hi Chris;
>>>>>
>>>>> The F6A will not do what you want it to do.
>>>>>
>>>>> The Sky Command control codes are transmitted with a TNC.
>>>>>
>>>>> They are not transmitted with touchtones and or DTMF tones.
>>>>>
>>>>> The handheld that will work is the TH-D7A.
>>>>>
>>>>> The D7A has a built-in TNC.
>>>>>
>>>>> 73 De Anthony W2AJV
>>>>> [log in to unmask]
>>>>> ECHOLINK NODE NUMBER: 74389
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Chris Schulte" <[log in to unmask]>
>>>>> To: <[log in to unmask]>
>>>>> Sent: Friday, December 14, 2007 5:06 PM
>>>>> Subject: sky command codes in text format
>>>>>
>>>>>
>>>>>> Ok, I'm not sure if Kenwood calls it sky command, or sky commander,
>>>>>> and
>>> =
>>>>>> being as how I'm too lazy to look in my tmv--71 manual or my ts-2000
>>>>>> =
>>>>>> manual for the exact name of it, I figured if I made a mistake, I'd
>>>>>> be
>>> =
>>>>>> forgiven. =20
>>>>>>
>>>>>> Anyway, does anyone have the control codes for sky command in a text
>>>>>> =
>>>>>> format that is readable? I was looking at it in my tmv-71 manual a
>>>>>> few
>>> =
>>>>>> days ago, and I can't for the life of me read or understand that
>>>>>> table
>>> =
>>>>>> that is in there. =20
>>>>>>
>>>>>> I'm going to be purchasing the THF6A in late january, and want to be
>>>>>> =
>>>>>> able to use it to remotely control the 71a. Thanks for any help,
>>>>>> Chris, w8cjs
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.503 / Virus Database: 269.17.2/1184 - Release Date:
>>> 12/14/2007 11:29 AM
>>>>
>>>>
>>>
>>
>
|
