Yeah, I hear you, Colin.
I will probably stick with the 718 and the TMV7A; but, just wanted to
pursue all possibilities.
I still may need to use two power supplies, though, if I need to monitor
and/or work both HF and VHF simultaneously, but that's doable.
Just kind of thinking out loud here.
Thanks for your thoughts.
73 from Tom Behler: KB8TYJ
----- Original Message -----
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, April 09, 2007 2:33 AM
Subject: Re: computer programming for the Icom 746?
> well, if you consider the monsterous size of the 746, the 718 and the
> tmv7A
> together would make a smaller and definitely more blind friendly set up.
> If you have the capability, even mating the two rigs together with velcro
> strips for one easy to handle package would still be smaller and lighter
> then the 746 I would think.
> You are also very familiar with both those rigs so ease of use and the
> learning curve play a bit of a factor as well.
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "T Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, April 08, 2007 8:46 PM
> Subject: Re: computer programming for the Icom 746?
>
>
>> Thanks very much, Anthony. ... I'll give your suggested options some
>> thought here, since I don't have the bucks now for a TS2000.
>>
>> My other option would be simply to take the TMV7A on the bike tour, and
> then
>> have my IC718 ready for HF communication if needed.
>>
>> I've got the antennas in the RV now; it's just a matter of figuring out
>> which combination of equipment would work best and be easiest to use for
>> whatever was needed.
>>
>> 73 from Tom Behler: KB8TYJ
>>
>> ----- Original Message -----
>> From: "Anthony Vece" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Sunday, April 08, 2007 8:08 PM
>> Subject: Re: computer programming for the Icom 746?
>>
>>
>> > Hi Tom;
>> >
>> > I had a 746 pro and I could not find a program that would let me
>> > program
> =
>> > memories.
>> >
>> > Maybe HRD would let you put those frequencies into the vfo.
>> >
>> > However, the pl tones on vhf would not be able to be programmed unless
>> > =
>> > you did it by hand and, even at that you need sighted help.
>> >
>> > Your only other option is to program the tone if the repeater is busy.
>> >
>> > And, if the tone is passed by the repeater then your good to go.
>> >
>> > I've been all through this and, for my money, the TS2000 will do =
>> > everything you need it to do with or without the programming software.
>> >
>> > I originally sold my TS2000 because I though the noise floor was a =
>> > little high.
>> >
>> > However, when you turn down the rf gain, adjust the digital filtering =
>> > and the tonal qualities of the receiver, you can do just as well.
>> >
>> > If I can help any further let me know.
>> >
>> > 73 De Anthony W2AJV
>> > [log in to unmask]
>> > ECHOLINK NODE NUMBER: 74389
>> >
>> > ----- Original Message -----=20
>> > From: T Behler=20
>> > To: [log in to unmask]
>> > Sent: Sunday, April 08, 2007 7:06 PM
>> > Subject: [BLIND-HAMS] computer programming for the Icom 746?
>> >
>> >
>> > Hi, all, and Happy Easter!
>> >
>> > Does anyone know if the Icom 746 can be programmed via a computer, =
>> > like the=20
>> > Kenwood TMV7A or THF6A?
>> >
>> > I don't think it can, but maybe I'm wrong.
>> >
>> > If so, is the software available on line somewhere?
>> >
>> > How about the needed programming cable?
>> >
>> > I am going to be the main net control station for the state-wide =
>> > Michigander=20
>> > Bike Tour this summer, and thought the 746 would be a great rig to =
>> > use,=20
>> > since it has HF, and VHF all in one radio.
>> >
>> > But, if the rig can't be programmed via the computer, using it may be
>> > =
>> > more=20
>> > trouble than it's worth, because some of the functions on the radio =
>> > (such as=20
>> > PL tones) aren't very blind friendly.
>> >
>> > Thanks, and 73 from Tom Behler: KB8TYJ
>> >
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.446 / Virus Database: 269.0.0/751 - Release Date: 4/7/2007
> 10:57 PM
>>
>>
>
|