Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 8 Aug 2007 17:47:34 -0400 |
Content-Type: |
text/plain; format=flowed; charset="iso-8859-1";
reply-type=original |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
I use tape as well, you're right, especially if you need the reducers.
That's why I started using tape was the reducers for the thin coax and now I
make sure they're all like that.
----- Original Message -----
From: "Bob Tinney" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, August 08, 2007 5:18 PM
Subject: Re: crimping verses solder
> The method that I mentioned for connecting coax connectors that I use
> really
> works well for all kinds of coax sizes. Using the metal 259 adaptors just
> doesn't work well for anyone, but filling the connector with tape seems to
> stop the corrosion problem and I've put lots of tension on my connectors
> and
> still no problem. I do one more thing on 9913 coax since there is so much
> air in the line. At the lowest point in the line, usually at a drip loop,
> I
> put a pin hole on the bottom side of the coax to allow any moisture in the
> coax to drip out.
> 73
> Bob, [log in to unmask], K8LR
> Skype Name: bobtinn
> Life is full of challenges, that's what makes it interesting!
>
> ---
|
|
|