BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Lou Kline <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Thu, 12 Jul 2007 18:48:48 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (91 lines)
Hi.

Basically, it is a S O B to tune on 40 meters, but everything else works 
fine.  That has been my experience with it.  You wouldn't need a tuner if 2 
to 1 SWRs are OK with you, but it is tough to get it below that on the CW 
portion.  It looks better in the phone portion.  If I still had my old 
Kenwood TS520S, I wouldn't think twice about it, but with the newer stuff, 
I'd rather tune some of that SWR out.  True the radio is probably well 
enough protected that no damage is going to occur, but that is mostly 
because it starts rolling back the power so you get the double 
whamie.  Also, keep in mind that on 80 meters, the window that is below the 
2:1 points is about 50 KHz wide, and where it centers is governed by the 
capacitor that is in the top of the band.  If you let the manufacturers 
know where you plan to operate on 80, they can sell you a capacitor that 
will center the SWR in that range.

I had a discussion with tech support about the tuner issue.  They don't 
encourage the use of antenna tuners because using them with high powered 
stations can cause the afore mentioned capacitor to puncture, rendering the 
antenna unusable on all bands.  He did let on that although GAP doesn't 
encourage it, you shouldn't run into a problem at the 100 watt power level.

73, de Lou K2LKK



At 05:49 PM 7/12/2007 -0500, you wrote:
>Hi;
>The key words might be "set up properly".  Supposedly the holes are all
>predrilled and you can't go wrong, no need for an analyzer etc.  I suspect
>if it sounds to good to be true it just might be.  Its the getting it set up
>properly that I'm investigating.
>Richard
>----- Original Message -----
>From: "Colin McDonald" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Thursday, July 12, 2007 2:20 PM
>Subject: Re: gap questions
>
>
>When you first set up the gap, you have to tune for each band.  That is, if
>its not already set properly.
>So, i gather from the discussions on this list and others, that the gap on
>40 meters just takes a little more manual tweaking of the antenna, compared
>to other bands where following the instructions when first putting it
>together is good enough.
>The antenna, once set up properly, does not require an antenna tuner to
>function on the bands it is designed for.
>73
>Colin, V A6BKX
>----- Original Message -----
>From: "Richard Fiorello" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Thursday, July 12, 2007 1:00 PM
>Subject: gap questions
>
>
> > Hi;
> > I suspect we may have been through some of this territory before but I
>still
> > have a question or two.  I had a brief chat with our friends at gap.  They
> > tell me that the gap Titan is pretuned and there is no tuning necessary
>even
> > for 80 meters.  I thought someone here said that 40 meters took some work
>to
> > tune?  Any clarification would be helpful.
> > Richard
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.476 / Virus Database: 269.10.4/897 - Release Date: 7/11/2007
>9:57 PM
> >
> >
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.476 / Virus Database: 269.10.4/898 - Release Date: 7/12/2007 
>4:08 PM

Louis Kim Kline
A.R.S. K2LKK
Home e-mail:  [log in to unmask]
Work e-mail:  [log in to unmask]
Work Telephone:  (585) 697-5753 

ATOM RSS1 RSS2