What dos pressing and holding a volume control do? I tried that on mine
and it didn't seem to do anything except make a high beep, then when I
did it again, a low beep.. I didn't notice it doing anything else. How
do you mute a band if you want?
73s
Butch Bussen
wa0vjr
On Fri, 4 Jan 2008, T Behler wrote:
> Steve:
>
> Your strategy worked flawlessly.
>
> Thanks so much for putting up with my brain freeze.
>
> It's amazing how we forget or loose track of the simplest of things
> sometimes.
>
> And, I may just do that "mute" thing with an available PF key.
>
> 73 and thanks again from a slightly embarrassed and sheepish Tom Behler:
> KB8TYJ
>
> ----- Original Message -----
> From: "Steve Dresser" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, January 04, 2008 10:37 PM
> Subject: Re: monitoring both VFO A and VFO B simultaneously on TMV71A
>
>
>> Tom,
>>
>> Press and hold either of the volume controls. If you hear a low beep, you
>> will have succeeded in getting both receivers to monitor simultaneously.
>> This "press and hold" action is a toggle, and I'm guessing that you may
>> have
>> inadvertently muted one receiver when you were switching from A to B or
>> vice
>> versa. Also, check to be sure that you didn't accidentally turn the
>> volume
>> down on one of the receivers. Probably not the cause of the problem, but
>> it's easy enough to do. By the way, I've set up one of the PF keys on the
>> microphone to turn muting on and off so I can silence the other receiver
>> if
>> I'm in the middle of a QSO and don't want to be distracted by a burst of
>> activity on a machine I usually monitor.
>>
>> Steve
>>
>> ----- Original Message -----
>> From: "T Behler" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, January 04, 2008 21:16
>> Subject: monitoring both VFO A and VFO B simultaneously on TMV71A
>>
>>
>>> Hi, folks.
>>>
>>> I am having a real brain freeze here, and could use some help.
>>>
>>> I could swear that, at some point, I had figured out a way to monitor
>>> both
>>> VFO A. and VFO B. simultaneously with the TMV71A, but I now can't seem
>>> to
>>> remember how I did it.
>>>
>>> I have two external speakers, and can get either one or the other VFO' to
>>> work separately, but not simultaneously. I want to monitor our local
>>> 2-meter and 440 repeaters simultaneously if possible.
>>>
>>> What am I missing here?
>>>
>>> 73 from Tom Behler: KB8TYJ
>>>
>>>
>>>
>>>
>>
>>
>
|