Yes, i have found that as wel.
I have also found that i can adjust the sliders such as volume and squelch
controls by manipulating the mouse.
On the laptop, i can run my finger across the touch pad, or use the cursor
pointer to raise or lower the values.
However, I think i have a problem with connectivity, since everytime i
execute a command in HRD, i have to leave and come back into the application
window to execute another command.
I am using a USB to serial adapter, so this may be causing some issues.
73
Colin, CF6BKX
----- Original Message -----
From: "Anthony Vece" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, December 13, 2006 6:27 AM
Subject: Re: Ham Radio Delux IC-746PRO
> Hi Colin;
>
> When I use H
> RD, I have to use the J
> AWS curser to push the buttons.
>
> 73 De Anthony W2AJV
> [log in to unmask]
> ECHOLINK NODE NUMBER: 74389
>
> ----- Original Message -----=20
> From: Colin McDonald=20
> To: [log in to unmask]
> Sent: Monday, December 11, 2006 3:56 PM
> Subject: Re: [BLIND-HAMS] Ham Radio Delux IC-746PRO
>
>
> not really, i suspect ham radio deluxe shows different things with =
> different
> radios, and so far my experience is limited to the ts2000 and ts570.
> regards
> Colin
> ----- Original Message -----=20
> From: "Anthony Vece" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, December 11, 2006 1:52 PM
> Subject: Re: Ham Radio Delux IC-746PRO
>
>
> > Hi Colin;
> >
> > First of all, I was connected to the wrong jack.
> >
> > Now, I went down to the bottom of the screen.
> >
> > I clicked on the word "ready".
> >
> > However, before I clicked on the word, when I would press a button, =
> the =3D
> > volume on the radio would get lower.
> >
> > When I pressed the button again, the volume would come back up.
> >
> > Now, after I clicked on the word, now the buttons do not work but if =
> I =3D
> > go into the menus then, some selections seem to work.
> >
> > Any ideas?
> >
> > 73 De Anthony W2AJV
> > [log in to unmask]
> > ECHOLINK NODE NUMBER: 74389
> >
> > ----- Original Message -----=3D20
> > From: Colin McDonald=3D20
> > To: [log in to unmask]
> > Sent: Monday, December 11, 2006 1:22 PM
> > Subject: Re: [BLIND-HAMS] Ham Radio Delux IC-746PRO
> >
> >
> > I wonder what sorts of problems they are having?
> > It seems to me that HRD works beautifully with the 7000.
> > Not sure how well it works using jaws/window eyes though, but i =
> know =3D
> > the
> > friend that has the 7000 got HRD up and running without a hitch =
> after
> > getting the 7000.
> > 73
> > Colin, CF6BKX
> > ----- Original Message -----=3D20
> > From: "John Miller" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Monday, December 11, 2006 8:27 AM
> > Subject: Re: Ham Radio Delux IC-746PRO
> >
> >
> > > go to http://hrd.ham-radio.ch/ you'll find it there. I think it =
> =3D
> > does
> > > support the IC-7000 believe it or not already but there have =
> been =3D
> > issues
> > > with it form the forum talk but they're always coming out with =
> new
> > releases
> > > of it so I have no clue if the latest is what they mean or not.
> > > ----- Original Message -----=3D20
> > > From: "Anthony Vece" <[log in to unmask]>
> > > To: <[log in to unmask]>
> > > Sent: Monday, December 11, 2006 10:24 AM
> > > Subject: Re: Ham Radio Delux IC-746PRO
> > >
> > >
> > > > Hi Everyone;
> > > >
> > > > Can anyone tell me where to get HAM RADIO DELUXE?
> > > >
> > > > I imagine that it will work with the 7000 since the firmware =
> is =3D
> > the
> > same.
> > > >
> > > > And, does anyone know if the firmware can be upgraded in the =
> 7000?
> > > >
> > > > Thanks & 73 De Anthony W2AJV
> > > > [log in to unmask]
> > > > ECHOLINK NODE NUMBER: 74389
> > > >
> > > > ----- Original Message -----=3D20
> > > > From: "John Vernaleken" <[log in to unmask]>
> > > > To: <[log in to unmask]>
> > > > Sent: Sunday, December 10, 2006 3:49 PM
> > > > Subject: [BLIND-HAMS] Ham Radio Delux IC-746PRO
> > > >
> > > >
> > > > I am planning to use HRD with my IC-746PRO. Can some help
> > > > with cable questions?
> > > >
> > > > Is CT-17 the correct cable?
> > > > Is IC-CT17 same as CT-17?
> > > > Do I need any additional cables?
> > > > Are there cables avaiable from other manufactures?
> > > >
> > > > Thanks
> > > >
> > > > John KC2QJB
> > > >
|