yes.
You can program from channel 000 to what ever you want and the scan edge
frequencies are kept in a totally different memory alocation.
73
Colin, V A6BKX
----- Original Message ----- 
From: "Richard Fiorello" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, April 09, 2007 9:59 AM
Subject: Re: ict90 info


> Hi
> That was exactly my problem.  Even though there are "ten" scan edge
> frequencies you can still start at the first channel and the radio will
take
> care of the rest?
> Richard
> ----- Original Message ----- 
> From: "Colin McDonald" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, April 07, 2007 11:51 AM
> Subject: Re: ict90 info
>
>
> When i programmed my IC t90, I used the first 10.
> I think you are getting confused with scan edges, which are
non-programmable
> memory channels anyway.
> You can program them for beginning and end scan limits and that is it, but
> they don't even factor into the regular 500 memories.
> I program my own frequencies startting with channel 000.
> 73
> Colin, V A6BKX
> ----- Original Message ----- 
> From: "Richard Fiorello" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, April 07, 2007 10:56 AM
> Subject: ict90 info
>
>
> > Hi everyone;
> > I am about to reprogram the memories in my ict90.  I made the mistake of
> > reading the manual which left me confused.  Are the first two or the
first
> > ten memories set for frequencies that you really shouldn't change?
> > Originally I started with channel 11 but the manual suggested that only
> the
> > first two frequencies were really significant.
> > Richard
> >
> >
> > -- 
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.446 / Virus Database: 268.18.26/750 - Release Date:
4/6/2007
> 9:30 PM
> >
> >
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 269.0.0/752 - Release Date: 4/8/2007
8:34 PM
>
>