Depending upon how they display the levels, that might be a pretty tall
order, but I bet I can make the buttons accessible. As for the PSK31, that
will be harder because I do not have the interface to test PSK31, unless
there is a way to get it out of the TS2000S without coupling it to the
sound card. I don't have the interface at present, and I probably would
have to press my DEC Express into service down there to keep JAWS from
modulating the radio.
73, de Lou K2LKK
At 11:24 PM 6/19/2006 -0600, you wrote:
>definitely free.
>I think the web site was already given.
>there is also a PSK31 program bundled with HRD...would be nice if there
>could be scripts with that one as well.
>HRD has buttons for all the rig controls and some of them are ok...but some
>don't seem to function very well.
>It also shows levels such as power, mike, processer and so on.
>73
>Colin, V A6BKX
>----- Original Message -----
>From: "Louis Kim Kline" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Monday, June 19, 2006 8:31 PM
>Subject: Re: ham radio deluxe
>
>
> > Is this software something I can get a hold of? Seriously, if I can get
> > it, and it is able to be scripted, I know how to write JAWS sdcripts--it's
> > a large part of how I make my living. I'm not real familiar with this
> > program. Is it shareware or commercial software?
> >
> > 73, de Lou K2LKK
> >
> >
> >
> > At 11:58 AM 6/19/2006 -0600, you wrote:
> > >Hi list:
> > >i know this was brought up a while back, but i have just now started to
>play
> > >around with HRD with the TS2000.
> > >
> > >I am having some trouble getting jaws to click on certain buttons and
>make
> > >the radio do what the button says it will do...such as antenna tune, or
>USB,
> > >LSB and the other modes.
> > >I have to go into jaws cursor and mouse click on the button and then a
> > >context menu comes up with the options for that button.
> > >Also, entering frequency is a bit confusing...since there is VFO A and
>VFO B
> > >and they don't seem to change together...i was trying to enter
>frequencies
> > >in and it seemed that i had to enter into both VFO A and VFO B fields and
>it
> > >still wouldn't go to the frequency i wanted...any tips on using HRD with
> > >JAWS would be very much appreciated.
> > >Regards
> > >Colin
> >
> > Louis Kim Kline
> > A.R.S. K2LKK
> > Home e-mail: [log in to unmask]
> > Work e-mail: [log in to unmask]
> > Work Telephone: (585) 697-5753
> >
> >
Louis Kim Kline
A.R.S. K2LKK
Home e-mail: [log in to unmask]
Work e-mail: [log in to unmask]
Work Telephone: (585) 697-5753
|