I suggested it to a lot of people, MFJ included and they were 1 of the few
companies that liked the idea but no one went with it.
----- Original Message -----
From: "Lou Kline" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, May 19, 2007 11:37 PM
Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
> Hi.
>
> If you suggest it to MFJ, they'll probably build it and only one of the
> four functions will actually work!
>
> 73, de Lou K2LKK
>
> At 11:07 PM 5/15/2007 -0400, you wrote:
>>Anthony,
>>
>>That would take up a lot of space on a desk mic, but it might work well in
>>a
>>box with the PF keys.
>>
>>Steve
>>
>>----- Original Message -----
>>From: "Anthony Vece" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Tuesday, May 15, 2007 22:21
>>Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>>
>>
>> >I would also like to see a desk mic with a touchtone pad on it.
>> >
>> > 73 De Anthony W2AJV
>> > [log in to unmask]
>> > ECHOLINK NODE NUMBER: 74389
>> >
>> > ----- Original Message -----=20
>> > From: Steve Dresser=20
>> > To: [log in to unmask]
>> > Sent: Tuesday, May 15, 2007 7:59 PM
>> > Subject: Re: [BLIND-HAMS] Mc60 mc80 mc85 ...was...RE: changing mike =
>> > gain on tmv7a
>> >
>> >
>> > Brett,
>> >
>> > According to a friend of mine who got his information from a
>> > Kenwood=20
>> > technician, you address the PF functions by grounding either pin 3 or
>> > =
>> > 4=20
>> > through a resistor. Depending on the value of the resistor, you =
>> > address one=20
>> > of two PF keys. I've thought about building a box with four buttons,
>> > =
>> > one=20
>> > for each PF key, but I'm a bit chicken about soldering an RJ45 =
>> > connector.=20
>> > It's too bad none of the Kenwood desk mics have those functions, or =
>> > that=20
>> > somebody hasn't come up with a box similar to what I've described.
>> >
>> > Steve
>> >
>> > ----- Original Message -----=20
>> > From: "Brett Winches" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Tuesday, May 15, 2007 13:11
>> > Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>> >
>> >
>> > > You are right that capability would be wonderful. I wonder if you =
>> > could
>> > > add this if any of the wires in the cable are unused or otherwise
>> > > available? Has anyone looked at the schematic to see how the PF
>> > > function is done? =3D20
>> > > =3D20
>> > >
>> > >
>> > >
>> > > -----
>> > > BRETT WINCHESTER
>> > > [log in to unmask]
>> > > 208-639-8386
>> > > ###
>> > >
>> > >
>> > > -----Original Message-----
>> > > From: For blind ham radio operators
>> > > [mailto:[log in to unmask]] On Behalf Of Steve Dresser
>> > > Sent: Tuesday, May 15, 2007 10:00 AM
>> > > To: [log in to unmask]
>> > > Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>> > >
>> > > Brett,
>> > >
>> > > "PF" stands for "programmable function." Many of the Kenwood hand =
>> > mics
>> > > have PF keys which can be used to control functions such as the =
>> > speech,
>> > > or the Enter key, etc. They're usually controlled by items =
>> > somewhere in
>> > > the menu, and are radio-specific.
>> > >
>> > > Steve
>> > >
>> > > ----- Original Message -----
>> > > From: "Brett Winches" <[log in to unmask]>
>> > > To: <[log in to unmask]>
>> > > Sent: Tuesday, May 15, 2007 09:51
>> > > Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>> > >
>> > >
>> > >> Dumb question here Steve, What is a PF key? =3D3D20
>> > >>
>> > >>
>> > >>
>> > >> -----
>> > >> BRETT WINCHESTER
>> > >> [log in to unmask]
>> > >> 208-639-8386
>> > >> ###
>> > >>
>> > >>
>> > >> -----Original Message-----
>> > >> From: For blind ham radio operators
>> > >> [mailto:[log in to unmask]] On Behalf Of Steve Dresser
>> > >> Sent: Monday, May 14, 2007 8:48 PM
>> > >> To: [log in to unmask]
>> > >> Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on =
>> > tmv7a
>> > >>
>> > >> Yes they do have up/down buttons. They do not have PF keys, which
>> > =
>> > is
>> > >> too bad because I'd like to define some of them as I would on a =
>> > hand
>> > >> mic.
>> > >>
>> > >> Steve
>> > >>
>> > >>
>> > >>
>> > >
>> > >
>> > >
>> >
>> >
>> >
>>
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.5.467 / Virus Database: 269.7.5/812 - Release Date: 5/19/2007
>>1:52 PM
>
> Louis Kim Kline
> A.R.S. K2LKK
> Home e-mail: [log in to unmask]
> Work e-mail: [log in to unmask]
> Work Telephone: (585) 697-5753
|
