I just hate hand mics in the house, for my HT's, OK, the speaker mics are
alright, for my mobile, there's a good reason, but in the house, nope. I use
one on my UHF/VHF radio in the house just because I've heard amplified desk
mics on FM and there's not much that sounds worse though I have thought many
times about an MC-60A with out the pre amp on, especially now that the
number pad on my hand mic on the TM-G707A is completely worn out and I can't
use that anymore, it's just a plain mic now. I miss it, but it's still a
toss up, I really just don't like hand mics. In fact, the one for my TS-570
is still in the plastic rapping in the bottom of the box the radio came in,
which is so buried in the cellar, I'll probably never see it again and that
doesn't even bother me.
----- Original Message -----
From: "Lou Kline" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, May 19, 2007 11:32 PM
Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
> Hi.
>
> I wish that Kenwood would make a desk mic with the four program function
> buttons on it like the hand mic that I bought for the TS2000S. I use
> those
> buttons enough that I wouldn't consider running a desk mic instead of the
> hand mic, but if they made one that had the four program function buttons,
> then I probably would buy it in a heartbeat.
>
> 73, de Lou K2LKK
>
>
>
>
> At 08:50 AM 5/16/2007 -0400, you wrote:
>>There are also many, like myself that cant' stand hand mics. The only
>>radio
>>I use mine on is my duel bander and go kit radios, mostly because it's the
>>easiest way to run the radio. I can't remember the last time I used a hand
>>mic on my HF here in the house or anywhere else I don't have to.
>>----- Original Message -----
>>From: "Pat Tice" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Wednesday, May 16, 2007 7:09 AM
>>Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>>
>>
>> > It is an idea whose "time has come" to add a TTP to desk microphones.
>> > With EchoLink becoming more mainstream, there will be more demand.
>> >
>> > Many Handi-ham members need the stability of a desk mic if they have
>> > muscle/mobility disorders, etc.
>> >
>> > 73,
>> > Pat
>> > [log in to unmask]
>> >
>> > =20
>> >
>> > -----Original Message-----
>> > From: For blind ham radio operators
>> > [mailto:[log in to unmask]] On Behalf Of John Miller
>> > Sent: Tuesday, May 15, 2007 9:25 PM
>> > To: [log in to unmask]
>> > Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>> >
>> > I've suggested that one to a lot of manufacturers and a lot of people,
>> > the people want it, the manufacturers for what ever reason, just don't
>> > make it.=20
>> > I even went to MFJ with the idea.
>> > ----- Original Message -----
>> > From: "Anthony Vece" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Tuesday, May 15, 2007 10:21 PM
>> > Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>> >
>> >
>> >>I would also like to see a desk mic with a touchtone pad on it.
>> >>
>> >> 73 De Anthony W2AJV
>> >> [log in to unmask]
>> >> ECHOLINK NODE NUMBER: 74389
>> >>
>> >> ----- Original Message -----=3D20
>> >> From: Steve Dresser=3D20
>> >> To: [log in to unmask]
>> >> Sent: Tuesday, May 15, 2007 7:59 PM
>> >> Subject: Re: [BLIND-HAMS] Mc60 mc80 mc85 ...was...RE: changing mike =
>> > =3D
>> >
>> >> gain on tmv7a
>> >>
>> >>
>> >> Brett,
>> >>
>> >> According to a friend of mine who got his information from a=20
>> >> Kenwood=3D20 technician, you address the PF functions by grounding=20
>> >> either pin 3 or =3D 4=3D20 through a resistor. Depending on the =
>> > value of
>> >
>> >> the resistor, you =3D address one=3D20 of two PF keys. I've
>> >> thought=20
>> >> about building a box with four buttons, =3D one=3D20 for each PF key,
>> >> =
>> > but
>> >
>> >> I'm a bit chicken about soldering an RJ45 =3D connector.=3D20 It's =
>> > too=20
>> >> bad none of the Kenwood desk mics have those functions, or =3D =
>> > that=3D20 =20
>> >> somebody hasn't come up with a box similar to what I've described.
>> >>
>> >> Steve
>> >>
>> >> ----- Original Message -----=3D20
>> >> From: "Brett Winches" <[log in to unmask]>
>> >> To: <[log in to unmask]>
>> >> Sent: Tuesday, May 15, 2007 13:11
>> >> Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>> >>
>> >>
>> >> > You are right that capability would be wonderful. I wonder if
>> >> you=20
>> >> =3D could > add this if any of the wires in the cable are unused
>> >> or=20
>> >> otherwise
>> >> > available? Has anyone looked at the schematic to see how the PF
>> >> > function is done? =3D3D20
>> >> > =3D3D20
>> >> >
>> >> >
>> >> >
>> >> > -----
>> >> > BRETT WINCHESTER
>> >> > [log in to unmask]
>> >> > 208-639-8386
>> >> > ###
>> >> >
>> >> >
>> >> > -----Original Message-----
>> >> > From: For blind ham radio operators >=20
>> >> [mailto:[log in to unmask]] On Behalf Of Steve Dresser
>> >> >=20
>> >> Sent: Tuesday, May 15, 2007 10:00 AM > To:=20
>> >> [log in to unmask] > Subject: Re: Mc60 mc80 mc85=20
>> >> ...was...RE: changing mike gain on tmv7a > > Brett, > > "PF"=20
>> >> stands for "programmable function." Many of the Kenwood hand =3D mics
>> >> =
>> > =20
>> >> > have PF keys which can be used to control functions such as the
>> >> > =3D=20
>> >> speech, > or the Enter key, etc. They're usually controlled by items
>> >
>> >> =3D somewhere in > the menu, and are radio-specific.
>> >> >
>> >> > Steve
>> >> >
>> >> > ----- Original Message -----
>> >> > From: "Brett Winches" <[log in to unmask]> > To:=20
>> >> <[log in to unmask]> > Sent: Tuesday, May 15, 2007 09:51
>> >> =20
>> >> > Subject: Re: Mc60 mc80 mc85 ...was...RE: changing mike gain on tmv7a
>> >
>> >> > > >> Dumb question here Steve, What is a PF key? =3D3D3D20 >>
>> >> > =
>> >>>
>> >
>> >> >> >> ----- >> BRETT WINCHESTER >> =
>> > [log in to unmask]
>> >
>> >> >> 208-639-8386 >> ### >> >> >> -----Original Message----- >>=20
>> >> From: For blind ham radio operators >>=20
>> >> [mailto:[log in to unmask]] On Behalf Of Steve Dresser
>> >> >>=20
>> >> Sent: Monday, May 14, 2007 8:48 PM >> To:=20
>> >> [log in to unmask] >> Subject: Re: Mc60 mc80 mc85=20
>> >> ...was...RE: changing mike gain on =3D tmv7a >> >> Yes they do
>> >> have=20
>> >> up/down buttons. They do not have PF keys, which =3D is >> too
>> >> bad=20
>> >> because I'd like to define some of them as I would on a =3D hand
>> >> >>=20
>> >> mic.
>> >> >>
>> >> >> Steve
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> >
>> >
>> > ______________________________________________________________________
>> > All Inbound Courage Center email is scanned by the MessageLabs Email
>> > Security System.
>> > For more information please visit http://www.messagelabs.com/email
>> > ______________________________________________________________________
>>
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.5.467 / Virus Database: 269.7.5/812 - Release Date: 5/19/2007
>>1:52 PM
>
> Louis Kim Kline
> A.R.S. K2LKK
> Home e-mail: [log in to unmask]
> Work e-mail: [log in to unmask]
> Work Telephone: (585) 697-5753
|