Although the 480 won't give you readability readings, it can give you
S-meter readings. To make that happen, press the Menu button and
turn the channel knob until you hear "48." Then press the Up or Down
button until you hear "62." Exit from the menus by pressing the Menu
button again. Now, pressing the PF key will cause the signal
strength to be read out. For anything up to and including an S9, the
report is read in S units. For anything above S9, the DB above S9 is read out.
Incidentally, you can still get your frequency read out by pressing
the Enter key twice.
Steve
On Monday 6/19/06 12:50 ne5l wrote:
>Does any one know if you can get the kenwood480 to read out the signal =
>reporte like 49 59 55?