So?  If you want an s-meter reading, set menu 48 to 62.

----- Original Message ----- 
From: "Anthony Vece" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, December 26, 2006 6:15 PM
Subject: Re: TS-480SAT MENU WON'T GO ABOVE 60!!!


Steve;

My mic only has up/down buttons.


----- Original Message ----- 
From: "Steve" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, December 26, 2006 4:52 PM
Subject: Re: [BLIND-HAMS] TS-480SAT MENU WON'T GO ABOVE 60!!!


> Anthony,
>
> Don't know where you got that idea.  Menu 60 is the last one on the 480. 
> You
> might be thinking of the functions for programming the PF keys.  Menu 48:
> program PF key on control panel.  Menu 49-52 programs mike PF keys 1-4
> respectiviely.
>
>
> Here is the function table for the PF keys:
> 00-60 correspond with the Menu Items.
> 61: voice #1 reads frequency.
> Voice 62 S-Meter Reading
> 63: RX Monitor to force squelch open.
>
> 64: RX DSP Disable: receives using widest DSP setting.
>
> 65: Main Encoder lock
> 66: Send Key, makes your PF a send key since the 480 doesn't have a 
> dedicated
> one.
> 67: TX Tuning: regardless of mode, transmit a carrier at a fixed power 
> level.
> 68: LSB/USB Toggle
> 69: CW/FSK Toggle
> 70: FM/AM Toggle
> 71: TF-Set
> 72: Q MR
> 73: Q MI
> 74: SPLIT
> 75: A/B
> 76: M/V
> 77: A=B
> 78: Scan
> 79L: M > V
> 80: M.IN
> 81: CW Tune
>
> 82-84: Channel 1-3
> 85: Fine
> 86: Clr
> 87: MTR
> 88: MHz
> 89: Ant 1/2
> 90: NB
> 91: NR
> 92: BC
> 93: DNL
> 99: Off, no function.
>
> For the VGS-1: menu 15 sets volume, Menu 16 sets speed.
>
> hth,
> Steve, K8SP
> ----- Original Message ----- 
> From: "Anthony Vece" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, December 26, 2006 2:57 PM
> Subject: TS-480SAT MENU WON'T GO ABOVE 60!!!
>
>
> Hi Everyone;
>
> I just purchased a KENWOOD TS-480SAT.
>
> However, I can't get the menu numbers to go above 60.
>
> And, above 60 is where all the voice settings are.
>