KMS Tools & Equipment Ltd
110 Woolridge St
Coquitlam BC V3K 5V4
1-800-567-8979
www.kmstools.com 

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Gary Jackson
Sent: Thursday, August 10, 2006 2:55 PM
To: [log in to unmask]
Subject: Re: talking multimeter

Can you give us the web site and/ or phone number where we can get the
meter?

Gary

Gary Jackson    KK5GE
[log in to unmask]
Phone: 409-962-0353


----- Original Message -----
From: <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, August 10, 2006 12:55 PM
Subject: Re: talking multimeter


Butch, I called them.

It does ac and dc voltage, amperage, resistance, continuity, and 
capacitance.
There is a speak button on the meter itself but there's also one in the 
positive
probe.  If you get the probes backward for dc voltage it just gives you a 
minus
reading.  It also shows dead shorts and open circuits.  hile settings don't 
talk
when you set the meter to tell you which they're on, if you push either of 
the
talk buttons it will tell you.

It takes three AA batteries to run it.  Its construction is a plastic case 
but
its fairly heavy.  Probes can unplug from the meter and have needle ends. 
I'm
going to call to see if clamps are available for use with the meter.  The 
cables
on the probes are about a foot long.  There is also a builtin stand that 
pulls
out of the back of the meter to set it upright.

Tom


Tom Brennan  KD5VIJ, CCC-A/SLP
web page http://titan.sfasu.edu/~g_brennantg/sonicpage.html



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.10.8/415 - Release Date: 8/9/2006