John:
Is the default 12.5 KHZ?
If so, this is where my thf6a is set.
Now, can you tell me exactly how to enter the following frequency on the B
band?:
462.5625
As a college professor with a PHD, I can't believe I'm so challenged with
this problem. Either that, or something is weird with my THF6A that I
haven't figured out yet. HI! HI!
Thanks to all on the group for your patience here.
73 from Tom Behler: KB8TYJ
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, June 18, 2006 11:37 PM
Subject: Re: entering FRS and GMRS frequencies into THf6A
> if you set the step small it should work. Mine is at the default and it
set
> those
> frequencies in right.
> ----- Original Message -----
> From: "T Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, June 18, 2006 10:45 PM
> Subject: Re: entering FRS and GMRS frequencies into THf6A
>
> > Steve:
> >
> > Well, I just checked with my XYL, and she says that the step is already
> > set
> > at 12.5. It still won't let me put the last digit in. When I enter
> > 462.5625, I get a long beet when hitting the last 2, and it rounds it
off
> > to
> > 462.550.
> >
> > Is there something I need to adjust in the menus?
> >
> > By the way: the step can be adjusted, as you said, by using the
function
> > key and then 0.
> >
> > If someone can give me a step-by-step procedure on this one, I'd
> > appreciate
> > it.
> >
> > 73 from Tom Behler: KB8TYJ
> >
> >
> > ----- Original Message -----
> > From: "Steve Dresser" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Sunday, June 18, 2006 10:08 PM
> > Subject: Re: entering FRS and GMRS frequencies into THf6A
> >
> >
> >> Tom,
> >>
> >> You have to change the frequency step from 25 to 12.5
> >> KHz. Otherwise, the radio rounds off the last digit. Changing the
> >> step is most easily done with the software. To do it on the radio, I
> >> think you have to press Function-0 and rotate the tuning knob to the
> >> appropriate setting.
> >>
> >> Steve
> >>
> >> On Sunday 6/18/06 20:29 T Behler wrote:
> >> >Hi, all.
> >> >
> >> >Thanks to Bob (K8LR), I now have the first 14 FRS channel frequencies,
> > and
> >> >since the first 7 correspond with GMRS channels, this gives me
something
> > to
> >> >work with.
> >> >
> >> >However, I have an interesting problem when trying to enter these
freqs
> > into
> >> >my Kenwood THF6A.
> >> >
> >> >when I try entering the FRS frequencies via the keypad on band B. of
> > the
> >> >Kenwood THF6A HT, I
> >> >get a long beap before I can key in the last of the four digits after
> >> >the
> >> >decimal point.
> >> >
> >> >Do I need to do something to get the THF6A to accept this fourth
digit,
> > or
> >> >do I just enter the first three digits after the decimal point and use
> > the
> >> >tuning knob to fine tune it to the fourth digit?
> >> >
> >> >Thanks, and 73 from Tom Behler: KB8TYJ
> >>
> >
> >
>
|