Thanks again, Steve. I really appreciate this info.
73 de KB8TYJ
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, May 05, 2006 4:42 PM
Subject: Re: working with a Predator Screw-driver-type antenna
> Tom, The TW-1 is for hf and 6 meters the TW-2 is for vhf/uhf. Each
is
> around 150$.
> Good luck, Steve KW3A
> ----- Original Message -----
>
>
>
> From: "T Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, May 05, 2006 4:12 PM
> Subject: Re: working with a Predator Screw-driver-type antenna
>
>
> > Steve:
> >
> > I can check on the LDG web site, but do you happen to know off hand what
> the
> > price of the TW1 is? I can't afford one right now, but it sure sounds
> like
> > something to think about in the future.
> >
> > Isn't there also an LDG TW2? If so, what's the difference between that
> and
> > the TW1?
> >
> > Thanks, and 73 from Tom Behler: KB8TYJ
> >
> > ----- Original Message -----
> > From: "Steve Forst" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Friday, May 05, 2006 4:08 PM
> > Subject: Re: working with a Predator Screw-driver-type antenna
> >
> >
> > > Tom,
> > >
> > > I know you already have money invested in your talking wattmeter,
but
> > > the LDG TW-1 has 2 different tuning tones. Hit a button and tone
will
> > > decrease as swr goes down. When you get to a flat, low pitch, it is
> 1.0
> > > swr. Using the other tone for power yu can tune to increase the
pitch
> ,
> > > higher the pitch, the more power out. Runs off 12 vdc and has built
> in
> > > speaker. It has made tuning my Palstar manual tuner a breeze.
> > Perhaps
> > > it would work in your situation.
> > >
> > > 73 Steve, KW3A
> > >
> >
> >
> >
> >
>
|