From the ICanWorkThisThing.com manual:
#14.18 Keypad Direct Entry

You can select the desired operating frequency, memory channel, or tone
frequency by entering numbers directly from the mc-53dm microphone. To
use this function, assign the enter function to any programmable function
key first.
...skip some stuff...
Tone Frequency Number Entry

1 Select the desired band.

2 Press tone to activate the tone function.

3 Hold F for 1 second, then press T.SEL. The current tone frequency
appears.

4 Press the mic key re-programmed with enter. "---" appears

5 Use the mic keypad to enter the number corresponding to the desired tone
frequency. Consul the table given in "selecting a Tone frequency" to find
out. how the tone numbers correspond to the tone frequencies.

Below are the tones for the v7, I think the 707 is the same.
CTCSS tones

1: 01 67.0
02 71.9
03 74.4
04 77.0
05 79.7
06 82.5
07 85.4
08 88.5
09 91.5
10 94.8
11 97.4 2
12 100.0
13 103.5
14 107.2
15 110.9
16 114.8
17 118.8
18 123.0
19 127.3
20 131.8
21 136.5
22 141.3
23 146.2
24 151.4
25 156.7
26 162.2
27 167.9
28 173.8
29 179.9
30 186.2
31 192.8
32 203.5
33 210.7
34 218.1
35 225.7
36 233.6
37 241.8
38 250.3
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of John Miller
Sent: Tuesday, February 28, 2006 7:58 PM
To: [log in to unmask]
Subject: Re: tmg-7a and tmv-7a


I never could ender tones with the mic on the 707. How?
----- Original Message ----- 
From: "Kenneth Lee" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, February 28, 2006 7:09 PM
Subject: Re: tmg-7a and tmv-7a


Correct the v7 doesn't read the pl, but with either radio you can easily
enter the tone directly from the microphone.=20

Regards, Ken=20

-----Original Message-----
From: For blind ham radio operators =
[mailto:[log in to unmask]]
On Behalf Of John Miller
Sent: Tuesday, February 28, 2006 12:55 PM
To: [log in to unmask]
Subject: Re: tmg-7a and tmv-7a


I'm guessing you mean the TM-g707A and the TM-V7A, difference being, the =

TM-V7A can listen on both bands at once and to cross band repeat and the =

707A can't though it can scan like I have it setup and that's almost as =
good

and for my uses better. Cross band repeat would be nice now and then but =
I=20
don't need it. Also, the G707A speaks the PL tones and the V7A doesn't. =
Not=20
a huge deal usually so long as it beeps different at the lowest setting =
or=20
something.

--=20
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.1/270 - Release Date: 2/27/2006
=20

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.1/270 - Release Date: 2/27/2006
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.1/270 - Release Date: 2/27/2006